Web: http://www.shelly.cloud
Changes in the contact data are published by the Manufacturer at the official
website of the Device http://www.shelly.cloud All rights to trademarks She® and
Shelly® , and other intellectual rights associated with this Device belong to
Allterco Robotics EOOD.
Initial Inclusion
Place Shelly into the power socket without any device/load connected to the Shelly.
Press the Power Button. The LED should flash red/blue. This means that Shelly is in
AP mode. Press the Button again and the LED will turn off. This means that Shelly is
turned off.
LED States
• Blue flashing quickly - AP Mode
• Blue flashing slowly - STA Mode (no cloud)
• Blue still - STA Mode (connected to cloud)
• Red still - Rely On
• Red & Blue flashing quickly - FW Update
Some of the features of the Shelly Cloud mobile application are available at
https://my.shelly.cloud/ as well.
Control your home with your voice
All Shelly devices are compatible with Amazons’ Alexa and Goggles' Assistant.
Please see our step-by-step guides on: https://shelly.cloud/compatibility/
Shelly application
To Next Page
Loading...
