SHELLY PLUG S
USER AND SAFETY GUIDE
Shelly® Plug S by Allterco Robotics is intended to be placed into a standard Plug
Type F (IEC) in order to control the electric power through it. Shelly may work as a
standalone device or as an accessory to a home automation controller.
Specification
• Power supply: 110-230V ±10% 50/60Hz AC • Max load: 12A / 230V, 50/60Hz
• Complies with EU standards: RE Directive 2014/53/EU, LVD 2014/35/EU, EMC
2014/30/EU, RoHS2 2011/65/EU
• Working temperature: -20°÷40 °C
• Radio signal power: 1mW
• Radio protocol: WiFi 802.11 b/g/n
• Frequency: 2412-2472 MHz(max. 2483.5 MHz); • Operational range: up to 50 m
outdoors or up to 30 m indoors
• Dimensions (HxWxL): 70x44x 44 mm. • Electrical consumption: < 1W
• SAR: 1.15 W/Kg
Technical Information
• Control through WiFi from a mobile phone, PC, automation system or any other
Device supporting HTTP and/or UDP protocol.
• Microprocessor management.
⚠CAUTION! Danger of electrocution. Connecting the device to the power grid has to
be performed with caution.
⚠CAUTION! Do not allow children to play with the device, especially with the Power
Button. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs)
away from children.
Introduction to Shelly
Shelly® is a family of innovative Devices, which allow remote control of electric
To Next Page
Need help?
General
Weight and Dimensions
