Device Inclusion
To add a new Shelly device, install it to the power grid following the Installation
Instructions included with the Device.
Step 1
After the installation of Shelly following the Installation Instructions and the power is
turned on, Shelly will create its own WiFi Access Point (AP).
⚠WARNING! If the LED does not flash red/blue, press and hold the Button for at least
10 seconds. The LED should then flash red/blue. If not, please repeat or contact our
customer support at: support@shelly.cloud
Step 2
Choose “Add Device”. In order to add more Devices later, use the app menu at the top
right corner of the main screen and click “Add Device”. Type the name (SSID) and
password for the WiFi network, to which you want to add the Device.
To Next Page
Loading...
