• Restore Last Mode: Configure Shelly to return to the last state it was in, when it has
power.
• Firmware Upgrade: Shows present firmware version. If a newer version is available,
you can update your Shelly by clicking Upload to install it.
Time Zone and Geo-location - Enable or Disable the automatic detection of Time
Zone and Geo-location.
Factory reset - return Shelly to its factory settings.
Device Reboot - reboots the device.
Additional Features - Shelly allows control via HTTP from any other device, home
automation controller, mobile app or server.
For more information about the REST control protocol, please visit www.shelly.cloud
or send a request to developers@shelly.cloud
To Next Page
Loading...
