Glass/Coating Clear Amber
Technical Information
Control through WiFi from a mobile phone, tablet, PC, auto- mation system or any other device supporting HTTP and/or UDP protocol
Microprocessor management
Controlled elements: multiple LED diods
Shelly may be controlled by an external switch
⚠CAUTION! Danger of electrocution. Plugging the device to the power grid has to be performed with caution.
⚠CAUTION! Do not allow children to play with the device. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away
from children.
⚠CAUTION! Please handle with care! The Shelly Vintage is FRAGILE!
Introduction to Shelly
Shelly® is a family of innovative devices, which allow remote control of electric appliances through mobile phone, PC or home automation
system. Shelly® uses WiFi to connect to the devices controlling it. They can be in the same WiFi network or they can use remote access
(through the internet). Shelly® may work standalone, without being managed by a home automa- tion controller, in the local WiFi network, as
well as through a cloud service, from everywhere the User has Internet access. Shelly® has an integrated web server, through which the User
may adjust, control and monitor the Device. Shelly® has two WiFi modes – Access Point (AP) and Client Mode (CM). To op- erate in Client
Mode, a WiFi router must be located within the range of the device. Shelly® devices can communicate directly with other WiFi devices through
HTTP protocol.
An API can be provided by the Manufacturer. Shelly® de- vices may be available for monitor and control even if the User is outside the
range of the local WiFi network, as long as the WiFi router is connected to the Internet. The Shelly Cloud function could be used, which is
activated through the web server of the Device or through the settings in the Shelly Cloud mobile application. The User can register and
access the Shelly Cloud, using either Android or iOS mo- bile applications, or any internet browser and the web site:
https://my.shelly.cloud/.
Installation Instructions
⚠CAUTION! Danger of electrocution. Before installing the De- vice into the light socket please check if it has been powered off.
⚠CAUTION! Use the Device only with power grid which com- ply with all applicable regulations. Short circuit in the power grid connected to the
Device may damage the Device.
⚠CAUTION! Please check the working voltage of the device and the supplied voltage of your power grid before installing the device! Installing
the device to a non recommended power sup- ply may lead to malfunction, danger to your life or violation of the law. Allterco Robotics is not
responsible for any loss or damage in case of incorrect installation or operation of this device.
⚠RECOMMENDATION! The Device may be connected to and may control electric circuits and light sockets only if they comply with the
respective standards and safety norms.
Declaration of conformity
Hereby, Allterco Robotics EOOD declares that the radio equip- ment type Shelly Vintage A60/A19, ST64/ST21, G125/G40 is in compliance
with Directive 2014/53/EU, 2014/35/EU, 2014/30/ EU, 2011/65/UE. The full text of the EU declaration of conformi- ty is available at the
following internet address https://shelly.cloud/knowledge-base/devices/shelly-vintage/ Manufacturer: Allterco Robotics EOOD
Address: Bulgaria, Sofia, 1407, 103 Cherni vrah Blvd.
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud Web: http://www.shelly.cloud
Changes in the contact data are published by the Manufacturer at the official website of the Device
http://www.shelly.cloud
All rights to trademarks She® and Shelly® , and other intellectual rights associated with this Device belong to Allterco Robotics EOOD
Read More About This Manual & Download PDF:
File Downloads
To Next Page
Loading...