Quick Release Levers
Quick release levers are located on your ebike for securing the seatpost and the front wheel to the bike. These provide convenience to the user since they allow the
front wheel to be removed and the seatpost to be adjusted without tools. Since quick release levers can be loosened during transportation, or accidentally between
or during rides, it is important that you regularly check to ensure these components are properly secured.
Accessories, Straps, and Hardware
Ensure all hardware is secured and all approved accessories are properly attached per the specific component manufacturer's instructions. It is good practice to
look over all hardware, straps, and accessories before each ride and if you do discover something is wrong or find something you are not sure about, have it
checked by a certified, reputable bike mechanic.
Suspension, Handlebar, Grips, and Seat Adjustments
The suspension fork on your ebike will affect the handling of the bike so you must understand how it works before use. The suspension fork should be properly
adjusted for your weight and terrain. Ensure the handlebar and handlebar stem are properly aligned, fitted to the user, and secured to their recommended torque
values. Handlebar grips should not move easily on the handlebar end. Loose, worn, or damaged handlebar grips should be replaced before you ride and can be
purchased from www.shengmilo-bikes.com The seat and seatpost should be properly aligned, fitted to the user, and the seatpost quick release should be properly
tightened, fully closed, and secured before riding.
Battery Charged, Secured, and Unplugged
Ensure the battery is adequately charged and operating properly. The battery gauge on the LCD display and charge status indicator on the battery should read
similarly. Ensure the battery charger is unplugged from the outlet, battery, then stored in a safe location before you ride. The battery MUST be locked onto the
frame battery mount properly before use. Do not operate the electrical system if the battery is removed.
To Next Page
Loading...
