Assembly Instructions
NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are not a complete or
comprehensive manual of all aspects of assembly, maintenance, and repair. Consult a certified, reputable bike mechanic to assist
with assembly, repair, and maintenance of your ebike.
Step 1: Unpack the bike. Open the bike box and remove the small box inside. With the help of another person capable of safely
lifting a heavy object, remove the Shengmilo MX03 from the bike box. Carefully remove the packaging material protecting the
bike frame and components. Please recycle packaging materials especially cardboard and foam whenever possible. Open the
small box and carefully set out all contents.
Ensure all the following pieces are included with the Shengmilo MX03:
• Front Wheel • Manual • Assembly Tool
• Handlebar Stem
faceplate bolts (4x)
• Front Wheel Quick Release • Charger • Pedals (marked left and
(in fork protector plate) right)
• Keys (2x, identical) • Headlight • Front&Rear Fenders
If there are any missing parts, please contact Shengmilo.
To Next Page
Loading...
