Step 3 : Before installing the front fork, please refer to Step 1. First insert 2 washers and 1 buckle on the left side of the front wheel bearing
(the top of the buckle needs to face outward); insert 1 washer and 1 buckle on the right side of the front wheel bearing (the top of the buckle
needs to face outward). Then clamp the front fork to the bearings on both sides of the front wheel and tighten the screws with a tool.
（1）Front fork alignment bearing （2）Tighten the front fork （3）Tighten the screws with tools
Step 4 : When connecting the front wheel motor cable plug, pay attention to the alignment of the arrows.
To Next Page
Loading...
