(*The push function is recommended to be used when pushing the bike uphill. Do not use this function while riding.)
6. Cruise mode: When using pure electric power, reach the speed you are satisfied with, long press the button to enter the battery life
mode. Press and hold the key again or press the brake to cancel this mode.
(*It is recommended to use this mode when the road surface is flat and there are few people.)
7. When the electric control system of the electric bicycle fails the instrument will automatically display the error code.
The detailed error code definition is shown in the following table:
When there is an error code on the display page, please contact the dealer in time to help you troubleshoot, the electric bicycle will not be
able to run normally when there is a fault.
To Next Page
Loading...
