Shenzhen HYDTHC XPTHC-300-3

To Next Page



HYDCNCTechnologyCO.,LTD

Tel:+86‐755‐26625800

Fax:+86‐755‐26729960

Http://www.hydcnc.com



XPTHC-300-3

Arc Voltage Plasma Height Controller

User Manual

Shenzhen HongYuDa CNC TECH Co.,LTD

Need help?

Do you have a question about the Shenzhen HYDTHC XPTHC-300-3 and is the answer not in the manual?

Summary

1.6 Basic Functions of XPTHC-300-3

Auto Initial Height Sensing(IHS), Dual speed IHS

Explains automatic initial height sensing and its dual-speed feature.

Proximity Switch HIS

Describes how the proximity switch functions for height sensing.

Retaining cap IHS

Details the process for using a retaining cap for height sensing.

Automatically operation

Describes the automated sequence of operations during cutting.

Torch Anti-Collision Function

Details the safety feature preventing torch collision with the workpiece.

1.7 THC Work Flow

1.7.1 Wok with IHS

Explains the workflow when using Initial Height Sensing (IHS).

2. XPTHC-300-PT Function and set

2.1 XPTHC-300-3 operation panel

Details the controls and displays on the front panel of the XPTHC-300-3.

Set Arc Voltage

Explains how to set the desired arc voltage for cutting.

Arc and status display

IHS HEIGHT

Explains how to set the initial height for sensing.

PIERCING DELAY

Describes the setting for the delay before cutting after arc start.

PIERCING HEIGHT

Details the setting for the height during the piercing process.

2.2 XPTHC-300-3 Parameter Setting and Alarm Diagnose

Parameters

Set parameter

2.3 Parameters details

Common parameters

Special parameter

P9. proximity switch IHS logic

PO. Contact IHS

2.4 Alarm codes details

Alarm code instruction

Alarm reason

Solution

2.5 XPTHC-300-3 Sensitivity and Motor Plug-Braking Setting

R501, sensitivity adjustment

3. XPTHC-300-3 interface connectors

3.1 POWER

3.2 TO TORCH

3.3 TO CNC

3.4 XPTHC-IHS controller connector (1 X2)

3.4.1 IHS SELECT

Proximity Switch IHS Workflow

3.4.2 Isolation voltage divide

四 XPTHC-300-3 Wiring diagram

4.1 wiring diagram

五 trouble and advise

5.1 common troubles

5.2 some advise: