V1.2 16.03.08
USER MANUAL
WELDING INVERTER
Sherman DIGITIG 206P AC/DC
WARNING!
Before installing and commissioning the device, you must read this instruction
1.
GENERAL NOTES
Launch and operation of the device can be made only after a thorough reading of this manual.
Due to continuous technical development unit, some of its features may be subject to modifications
and performance may differ in detail from the descriptions in this manual. This is not a device error,
but the result of progress and continuous work of modification of the device.
Damage to the appliance caused by improper handling causes the loss of warranty. Any alteration of
the charger are forbidden and result in loss of warranty.
2.
SECURITY
Equipment operators should possess the necessary qualifications entitling them to perform welding
work:
•
should be an electric welder welding electrodes coated and coated gas,
•
know the rules of SAFETY operation of power equipment such as welding machines and auxiliary
powered electricity,
•
know the rules of SAFETY when handling cylinders and installation of compressed gas (argon), • be
familiar with the content of this manual and operate in accordance with its intended purpose.
To Next Page
Need help?
General
