Need help?Do you have a question about the Sherman TIG 320AC / DC PULSE and is the answer not in the manual?
Lists specific dangers associated with electric arc welding, including eye/skin damage, burns, and explosion risks.
Details measures to prevent electric shock during operation and maintenance procedures.
Outlines protective measures against the negative effects of the electrical arc, such as radiation.
Lists essential checks and inspections required before starting the welding equipment.
Defines the duties and required qualifications for personnel operating the welding device.
Provides a table of common symptoms and methods for their removal.
General| Output Current Range (TIG DC) | 10-320A |
|---|---|
| Output Current Range (TIG AC) | 10-320A |
| Output Current Range (MMA) | 10-320A |
| Duty Cycle (TIG 320 A) | 60% |
| Duty Cycle (MMA 320 A) | 60% |
| AC Frequency | 20-200Hz |
| Pulse Function | Yes |
| Frequency | 50/60Hz |
| Welding Method | TIG, MMA |
| Input Voltage | 3x400V |
| Pulse Frequency | 0.5Hz |
| Cooling System | Fan |
To Next Page
