EasyManua.ls Logo

Sherwood Scuba Wisdom 2 - User Manual

Sherwood Scuba Wisdom 2
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sherwood Scuba Wisdom 2 and is the answer not in the manual?

Summary

Responsible Computer Diving

Limited Two-Year Warranty

Statement of Limitations - General

Details the exclusions and conditions of the warranty coverage.

Decompression Model

Tissue Compartment Control

Tracks nitrogen absorption in tissue compartments using a multileveled algorithm.

No Decompression Limits (NDLs)

Lists the maximum dive times allowed without decompression stops at various depths.

Oxygen Exposure Limits (OTLS)

Defines the safe limits for oxygen exposure during dives based on NOAA guidelines.

Introduction

Features and Displays

Intuitive Displays

How information is presented via alpha-numeric displays and graphic icons.

Bar Graphs

Explains Nitrogen and Oxygen bar graphs for dive status and saturation.

Informational Displays

Details specific displays like Tank Pressure and Depth, and their meanings.

Audible Alarm

Explains the unit's audible alerts for various dive conditions and warnings.

Backlight and Power Supply

Low Battery Condition

Describes indicators and behavior when battery power is low.

Operating Temperature

Specifies the operating temperature range for the device and potential effects.

Sharing the Wisdom 2

Activation and Setup

Activation

Describes methods to activate the dive computer via button press or water contact.

Diagnostic Mode

Explains how to run a diagnostic check on the unit's sensors and display.

Entering Settings

Guides users through accessing and navigating the device's setting menus.

Set 1 Group (Modes;Basics)

Covers setting the operating mode (Air, Nitrox, Gauge) and basic parameters.

Set 2 Group (Alarms)

Manages dive-related alarms like ascent, depth, and pressure.

Set 3 Group (Utilities)

Configures utility functions such as sensor activation and units of measure.

Set 4 Group (Date;Time)

Allows setting the device's time, date, and hour format.

Dive Modes

Dive Time Remaining (DTR)

Explains the display of remaining dive time under various conditions.

Operational Dive Modes

Describes main and alternate displays for operational dive modes.

No Decompression Dive Mode Safety Stop

Details the safety stop procedure during no-decompression dives.

Digital Gauge Mode

Explains the device's function as a simple dive gauge.

High PO2 Dive Mode

Mode for dives with elevated partial pressure of oxygen.

Decompression Dive Mode

Explains displays and procedures for decompression dives.

Violation Handling

Conditional Violation Under Water

Alerts and operations during conditional violations.

Delayed Violation #1 - Above Stop Depth > 5 Minutes

Specific delayed violation for exceeding stop depth duration.

Delayed Violation #2 - Exceeded Ceiling

Violations for exceeding decompression ceiling depth.

Permanent Violation;Gauge Mode Under Water

State and operation during permanent violations.

Care and Maintenance

Care and Cleaning

Instructions for cleaning and protecting the dive computer.

Inspections and Service

Recommends regular inspections and professional servicing.

Battery Replacement

Guides users through replacing the device's battery.

Reference Material

No Decompression Limits at Altitude (Imperial)

Dive time limits adjusted for altitude in imperial units.

No Decompression Limits at Altitude (Metric)

Dive time limits adjusted for altitude in metric units.

Glossary

Inspection; Service Record

Sherwood Scuba Wisdom 2 Specifications

General IconGeneral
BrandSherwood Scuba
ModelWisdom 2
CategoryDiving Instrument
LanguageEnglish

Related product manuals