Need help?Do you have a question about the Sherwood DEK-7U and is the answer not in the manual?
Apparatus must not be exposed to dripping or splashing, and no liquid-filled objects should be placed on it.
Do not remove covers; no user-serviceable parts inside. Refer servicing to qualified personnel.
Alerts user to un-insulated dangerous voltage within the product enclosure that may pose a risk of electric shock.
Alerts user to important operation and maintenance instructions in the accompanying literature.
Do not use the power cord with extension cords or other outlets unless blades are fully inserted to prevent exposure.
Covers Start/Stop, Motor Off, Platter Speed Selection, and Record/Stop button functions.
Includes Pitch Slider, Anti-Skate Knob, and Counterweight for precise adjustments.
Details Phono/Line output switching and USB recording socket functionality.
Step-by-step guide for playing a vinyl record on the turntable.
Instructions for recording audio from the turntable to a USB flash drive.
Information on editing recordings using the supplied Audacity software.
Addresses problems like platter not rotating, no sound, and distorted sound.
Covers tempo inaccuracies, unusual noise, tonearm descent, and intermittent sound.
Resolves issues related to USB device formatting and recording light status.
Details Sherwood's warranty coverage for parts and labor for specific product types.
Outlines legal rights, validity, and requirements for obtaining warranty repairs.
Specifies exclusions from warranty coverage, including misuse and wear and tear.
Instructions on how to obtain warranty service and what information to provide.
Details turntable type, motor, drive method, platter, speeds, and USB function.
Provides details on tonearm type, length, output levels, and frequency response.
Covers power supply, consumption, dimensions, weight, and included accessories.
Procedure to balance the tonearm to be parallel with the platter.
How to set the correct tracking force for the stylus using the counterweight.
Guide to adjusting the anti-skate mechanism based on tracking force.
Steps for removing the wire securing the tonearm and protecting the stylus.
Instructions for connecting the power cord and testing turntable operation.
Steps for inserting the headshell and sliding on the counterweight.
Setting anti-skating and connecting RCA leads to amplifier/receiver.
Identify and place the turntable platter and felt slipmat on the spindle.
Instructions for connecting the drive belt to the motor pulley.
To Next Page
General
