Sherwood Mini - User Manual

PELLET STOVE
Mini
PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE
OF THIS PELLET BURNING ROOM HEATER. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY
OR EVEN DEATH
Contact your building or fire officials about restrictions and installation
inspection requirements in your area.
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
TECHNICAL MANUAL
50-1221

Summary

Introduction and Safety Guidelines

Operational and Installation Safety Precautions

Covers electrical safety, glass handling, flammable liquids, smoke detectors, and installation basics.

Pellet Stove Installation Procedures

Clearances to Combustibles and Alcove Installation

Vent Termination Requirements

Details allowable exterior vent termination locations and minimum clearances.

Through-Wall Venting Configurations

Through-Wall Venting with Vertical Rise

Vertical Venting Installations

Outside Vertical Venting Installations

Hearth Mount Installation

Details the process for installing the pellet stove using a hearth mount configuration.

Exterior Mounted Exhaust Blower Installation

Step-by-step guide for installing the optional exterior mounted exhaust blower.

Through-Wall Venting with Exterior Blower Kit

Thermostat Installation

Optional Slider;Damper Installation and Setup

Troubleshooting and Maintenance

Stove Start-up and Operation Problems

Addresses issues like the stove not starting or operating when hot, and blower malfunctions.

Airflow, Ignition, and Heat Control Issues

Covers problems with ignition, airflow, vacuum, and heat level control.

Appliance Wiring Diagram

Sherwood Mini Specifications

General

Brand	Sherwood
Model	Mini
Category	Pellet stove
Language	English