To Next PageTo Next PageWhy is my Sherwood Stereo System not recording?
If your Sherwood Stereo System is not recording, check if the tabs have been removed from the tape. If they have, cover the holes with adhesive tape.
Why does my Sherwood WA-240 make a vibrating sound?
If your Sherwood Stereo System is producing a vibrating sound, the capstans or pinch rollers may be dirty. Try cleaning them. Also, the tape might be irregularly wound; try winding it regularly by fast forwarding, rewinding, or playing it fully from one reel to the other.
General| Power output | 40W per channel (RMS at 8 ohms, 1kHz, 10% THD) |
|---|---|
| Dimensions | 440 x 137 x 300mm |
| Weight | 7.2kg |
| Frequency response | 20Hz to 20kHz |
| Input sensitivity | 150mV (line) |
| Speaker load impedance | 8 ohms |
| Speaker Impedance | 8 ohms |
Details on unboxing, system placement, and handling precautions for safe operation.
Detailed explanation of buttons and indicators on the main unit's front interface.
Instructions for manually tuning into FM radio stations and receiving broadcasts.
Detailed instructions for playing audio CDs, including starting, pausing, and stopping playback.
Comprehensive instructions for recording audio onto cassette tapes from various sources.
Instructions for setting the timer to automatically play or record at a specified time.
