Shimano Steps DU-E6100 - Light Control and Mode Change; Wireless Connectivity; ANT and Bluetooth LE; Wireless System Specifications

20
LED2 indications
Status Indications
OFF When the power turned OFF
Lit in green Battery level: 100 – 21%
Lit in red Battery level: 20% or less
Blinks red Battery level: nearly empty
Turning the light ON / OFF
You cannot turn the light off while riding the bicycle.
1. Press and hold (about 2 seconds) the button until the
lights turn ON/OFF.
The LED1 blinks green.
Button
LED1
Changing the assist mode
1. Press button.
Assist mode is changed each time you press it.
The LED1 indicates current assist mode.
OFF
Lit in light blue
Lit in green
Lit in yellow
[OFF]
[ECO]
[NORM]
[HIGH]
LED1 indications Assist mode
LED1
Button