18
Installing electrical parts
Electric wires
Product name Intended purpose EW-SD300 type EW-SD50 type
Cord clip
Binding the wiring and the
brake outer casing / brake
hose together
EW-CL300-S
(for shift outer casing)
EW-CL300-M
(for brake outer casing
and brake hose)
Y70H98040
Cord cover
Supporting / protecting
the electric wire (external
wiring)
EW-CC300 SM-EWC2
Grommets
Installing to the wire
insertion hole of a frame
that supports internal
wiring
EW-GM300-S
EW-GM300-M
SM-GM01
SM-GM02
Cord band
Supporting the electric
wire (flat handlebar
external wiring)
EW-CB300-S
EW-CB300-M
EW-CB300-L
SM-EWE1
Junction [A]
(for DI2)
Gathering the wiring
around the cockpit. Also
has functions for changing
the shift mode, etc.
-
EW-RS910
SM-EW90-A
SM-EW90-B
Junction [B]
Branching / gathering the
wiring inside and outside
the frame
EW-JC304
EW-JC302
SM-JC41
SM-JC40
EW-JC200
EW-JC130
Conversion adapter
Refer to “Conversion
adapter.”
EW-AD305 EW-AD305
NOTICE
• The SHIMANO original tool used for installation/removal and the accessories used for
wiring differ for the EW-SD300 and EW-SD50. Be sure to use a compatible product.
• EW-CL300-S is marked with a groove in order to
differentiate it from EW-CL300-M.
Differentiation
groove
EW-CL300-M EW-CL300-S
To Next Page
Loading...
