Shimano Steps E5000 Series - Page 28

28
Installing the drive unit and peripheral parts
Installing the drive unit
(3) Tighten the mounting screws on the left side of the frame.
Rear
(2)
(1) Right side
(3) Left side
Drive unit mounting screw (M8)
10 - 12.5 N·m
Drive unit mounting screw (M8)
10 - 12.5 N·m
Installation hole
Drive unit
Front
NOTICE
• Drive unit mounting screws (M8) are not included with SHIMANO products. Use
the screws supplied by the bicycle manufacturer.