Need help?Do you have a question about the Shimano Alfine S7000 Series and is the answer not in the manual?
General| Type | Internal Gear Hub |
|---|---|
| Gear | 8-speed |
| Gear Ratio Total | 307% |
| O.L.D. | 135 mm |
| Spoke Hole | 32H, 36H |
| Brake Type | Disc Brake |
| Maximum Sprocket Size | 23T |
| Axle Type | Solid Axle |
| Chain Line | 42.7 mm |
| Compatibility | Rim Brake, Disc Brake |
| Shift Lever Compatibility | SL-S7000 |
Important notices regarding product use, safety, and dealer responsibilities.
Safety advice for installation, handling parts, and general user information.
Specific safety instructions for braking systems, including disc brakes.
Safety tips for bicycle installation, maintenance, and chain handling.
Cautions regarding shifting operation and disc brake burn-in period.
Notes on internal hub operation, noise, and product limitations.
Guidelines on sprocket ratios, maintenance intervals, and lubrication.
Safety notes for chain tensioners, specific models, and fork end compatibility.
Lists specific tools and model numbers needed for product assembly.
Steps for attaching the CS-S500 sprocket and chain guard to the hub body.
Procedures for installing the cassette joint pulley and fixing ring onto the hub.
Steps for mounting the disc brake rotor and installation ring to the hub.
Guide for attaching the hub axle to the bicycle frame, including non-turn washers.
Instructions for mounting the shifting lever onto the handlebar.
Detailed steps for connecting the shifting cable for internal 8-speed hubs.
Procedure for disconnecting the shifting cable when removing the rear wheel.
Detailed steps for connecting the shifting cable for internal 11-speed hubs.
Procedure for disconnecting the shifting cable when removing the rear wheel.
Steps for adjusting the cassette joint for internal 8-speed systems.
Steps for adjusting the cassette joint for internal 11-speed systems.
Procedures for removing and installing the indicator unit on 8-speed hubs.
Procedures for removing and installing the indicator unit on 11-speed hubs.
Guide to oil maintenance for internal 8-speed hubs using a specific kit.
Safety information and precautions for 11-speed internal geared hub oil maintenance.
Detailed steps for draining old oil from 11-speed internal geared hubs.
Instructions for cleaning the inside and injecting new oil into 11-speed hubs.
To Next Page