To Next PageTo Next Page
Need help?Do you have a question about the Shimano BT-DN110-A and is the answer not in the manual?
General| Type | Battery |
|---|---|
| Voltage | 7.4V |
| Battery | Lithium-ion |
| Capacity | 500mAh |
| Charging Time | 1.5 hours |
| Compatible Series | Di2 |
| Compatibility | Shimano Di2 systems |
| Operating Temperature | -10°C to 50°C |
Shows wiring configurations for external battery setups, detailing component connections.
Illustrates wiring connections for components located in the handlebar area.
Details the process of installing the hydraulic brake hose, including cutting and connecting.
Procedures for rear derailleur adjustment, including end screws and shift modes.
Guides for adjusting the front derailleur's height, angle, and limit positions.
Instructions for adjusting lever reach and free stroke for optimal ergonomics.
Guide to changing brake fluid and bleeding air from the hydraulic system.
Steps for replacing brake hoses, including length check, cutting, and connection.
How to adjust the friction setting on RD-RX815 and RD-RX817 rear derailleurs.
