To Next PageTo Next PageWhat to do if the Shimano Fishing Equipment display is black?
If the display of your Shimano Fishing Equipment is black or shows all characters, this can happen when the unit is left in a hot environment, like a car boot. The display should return to normal once the temperature decreases.
Why does my Shimano DendoUmaru 1000 Plays Fishing Equipment motor stop while winding?
The motor of your Shimano Fishing Equipment might stop while winding if the boat’s power supply terminal or the reel’s power cord connector is rusty. Ensure all screws on the power cord connector are secure. Remove any rust and try again. Also, check the battery charge.
What to do if Shimano DendoUmaru 1000 Plays display is not working?
If nothing appears on the display of your Shimano Fishing Equipment, check if the positive (+) and negative (--) power cord connections are properly connected to the battery. Also, verify the battery has sufficient charge and inspect the surface of the alligator clips for any foreign objects.
Why is my Shimano DendoUmaru 1000 Plays motor not working but the display is?
If the display of your Shimano Fishing Equipment is working but the motor isn't, it could be due to insufficient battery charge, which may cause the motor to work at low speed but not at high speed. A new battery may be required. Also, the motor may not work if the reel's temperature is below 0°C, or if the display shows less than 1m for safety reasons. Charge the battery and test the reel.
Why is my Shimano Fishing Equipment Gunwale Stop position wrong?
The Gunwale Stop position on your Shimano Fishing Equipment might be wrong due to winding tension or stretched line. Perform a 0 set. Note that the Gunwale set is only possible between 1~6m, and settings between 0~1m are rounded up to 1m for safety reasons.
Why does Shimano DendoUmaru 1000 Plays Fishing Equipment make a strange sound?
If your Shimano Fishing Equipment makes a strange sound even when not winding, the condenser may be vibrating due to an unstable power supply. This should not affect the reel's function, so it is safe to continue using it.
What to do if Shimano DendoUmaru 1000 Plays Fishing Equipment display not working in cold?
If nothing appears on the display of your Shimano Fishing Equipment when used in extreme cold (below -15°C), the LCD display is likely too cold. Wait for the circuit board inside the unit to warm up. When fishing in extremely cold conditions, it is recommended to keep the reel in the cabin or under cover until needed.
General| Brand | Shimano |
|---|---|
| Model | DendoUmaru 1000 Plays |
| Category | Fishing Equipment |
| Language | English |
High-performance corrosion-resistant bearings for smoother spool movement.
Automatically stops retrieving line at a set point for easy rig retrieval.
Returns the rig to the same depth after line repair for convenient fishing.
Adjusts retrieval speed and Rakuraku mode tension settings.
A new system that requires no programming for line management.
Sounds an alarm when a predetermined depth is reached.
Steps for feeding and tying the fishing line onto the spool.
Guidance on choosing the appropriate learning method for different line types.
Resets the counter to zero at the surface for accurate depth positioning.
Stops line retrieval at a specific point for easy rig handling.
Used for easy line winding when changing bait or handling a hooked fish.
Alerts the user when a predetermined depth is reached during fishing.
Select display modes for depth measurement from surface or bottom.
Switch between line tension control and constant spool speed.
Replicates the popular jigging fishing technique for all-day use.
Effective technique for squid fishing, using finger instead of brake knob.
Select display modes for depth measurement from surface or bottom.
Procedure to switch between Top-Down and Bottom-Up display modes.
Switch between Rakuraku Mode and Fixed Speed Mode using the Menu button.
Maintains a constant spool rotation speed regardless of fish size.
Instructions for basic reel cleaning and maintenance after fishing.
Steps to clean the reel if spool rotation deteriorates due to salt.
Protects the motor by automatically shutting off under excessive load.
Indicates battery level and connection status.
Error message for technical lever issues requiring repair.
Indicates when voltage is too high, requiring check of power source.
Indicates an error in line learning; suggests re-learning.
