To Next PageTo Next Page
Need help?Do you have a question about the Shimano FC-MT500-2 and is the answer not in the manual?
General| Model | FC-MT500-2 |
|---|---|
| Category | Bicycle Accessories |
| Crank Arm Length | 170mm, 175mm |
| Chainring Configuration | 2x |
| Chainring Teeth | 36-26T |
| Material | Aluminum |
| Crank Construction | 2-piece |
| Chainline | 48.8mm |
| Q-Factor | 176mm |
| Bottom Bracket | Hollowtech II |
| Compatibility | 10-speed |
| Weight | Approx 785g |
| Chain Compatibility | 9/10-speed |
| Bolt Circle Diameter | 64 mm |
General safety advice, including using genuine parts and eye protection.
User safety tips on chainrings, chain, and general maintenance.
Safety for HOLLOWTECH II and B type crankset installation and maintenance.
Lists specific Shimano tools required for installation, adjustment, and maintenance tasks.
Specifies tool combinations for installing BB-MT800/BB-MT801 and SM-BB52/BB-MT501.
Details the spacer installation method for 68mm and 73mm bottom bracket shells.
Instructions for greasing cups and installing the bottom bracket to the shell.
Details bottom bracket cups and assembly examples for press-fit types.
Step-by-step guide for installing the press-fit bottom bracket into the shell.
Procedure for safely removing the press-fit bottom bracket from the shell.
Instructions for inserting and tightening the crank arm unit and cap.
Details on securing the left crank arm screws with specified torque.
Procedure for replacing single chainring types like FC-M8000-1.
Replacing double chainrings for M8000, M7000, MT700, MT600 series.
Replacing double chainrings for M6000, MT500 series.
Information on chain drop prevention pins and covers for chainring repair.
Replacing double chainrings for FC-M617 series.
Replacing triple chainrings for M8000, M7000 series.
Replacing triple chainrings for MT500, M6000 series.
