Need help?Do you have a question about the Shimano FH-TX505 and is the answer not in the manual?
General| Model | FH-TX505 |
|---|---|
| Brake Type | Disc Brake |
| Axle Type | Quick Release |
| Freehub Body | Steel |
| Compatible Cassette | 8/9/10-speed |
| Color | Black |
| O.L.D. | 135mm |
| Material | Aluminum |
| Number of Holes | 36 |
| Brake Compatibility | CENTER LOCK |
| Spoke Hole Count | 36 |
| Category | Bicycle Hub |
Failure to follow instructions results in death or serious injury.
Failure to follow instructions could result in death or serious injury.
Failure to follow instructions could cause personal injury or equipment damage.
Follow provided instructions, use genuine parts, and wear eye protection during maintenance.
Check wheel security, quick release lever clearance, and rotor cooling before operation.
Follow front suspension fork manual for securing method and torque to prevent wheel detachment.
Product not warranted against improper use or normal wear; use Shimano lubricants for best performance.
Check spoke lacing pattern; radial lacing is not permitted.
Install disc brake rotor fixing lock ring with TL-LR15 tool to 40 N·m.
Disassemble front hub as shown, apply grease periodically to parts.
Disassemble freehub as shown, apply grease periodically; do not disassemble freewheel body.
Replace freewheel body by removing fixing screw or hub axle, following specific torque values.
To Next Page
