Shimano RD-TX35 User Manual

TOURNEY Rear Derailleur
RD-TX35
ITEM
NO.
1 Y5WS98010 Stroke Adjusting Screws (M4 x 15.3) & Plate
2 Y5WG98010 Cable Fixing Bolt Unit A
3 Y5V898030 Cable Adjusting Bolt Unit A
4 Y5T822100 B-Tension Adjusting Screw (M4 x 17.5) A
5 Y54M98030 Adapter Bolt (M5 x 11.5) & Nut A
6 Y5WS98020 B-Axle & Spacer (Direct Attachment Type)
7 Y5TW35010 Guide Pulley Bolt (M5 x 15.2)
8 Y5TW35040 Tension Pulley Bolt (M5 x 13.35)
9 Y5WS98030 Guide & Tension Pulley Unit
10 Y5WS09000 Inner Plate
A: Same parts. Jul.-2010-3100
B: Parts are usable, but differ in materirals, appearance, finish, size, etc.
©
Shimano Inc.
A
Absence of mark indicates non-interchangeability.
Specifications are subject to change without notice.
INTERCHANGEABILITY
SHIMANO
CODE NO.
DESCRIPTION
R
D
-
M
3
6
0
R
D
-
T
X
3
1

Shimano RD-TX35 Specifications

General

Model	RD-TX35
Mount Type	Direct Mount
Maximum Sprocket	34T
Pulley Teeth	13/13T
Weight	300 grams
Maximum Cog Size	34T
Speeds	7
Minimum Sprocket	14 teeth
Total Capacity	43 teeth
Compatibility	Shimano 7-speed

Summary

Rear Derailleur Adjustment Method

Top adjustment

Adjusting the guide pulley position relative to the smallest sprocket for optimal gear shifting.

Connection and securing of cable

Connecting and securing the shifter cable to the rear derailleur for proper operation.

Low adjustment

Adjusting the guide pulley to align with the largest sprocket for smooth shifting.

How to use the B-tension adjustment screw

Adjusting the B-tension screw for proper clearance between the guide pulley and sprockets.

SIS Adjustment

Fine-tuning the shifting system for smooth and accurate gear changes.