Shimano SM-PCE02 User Manual

(English) HM-G.3.4.0-00
Help Manual
(General Edition)
Thank you for purchasing Shimano products.
 This instruction manual explains the operation of the E-TUBE PROJECT.
Be sure to read this manual before use in order to fully utilize the
functions.
 In order to use the E-TUBE PROJECT, either the SM-PCE1, SM-PCE02, or
SM-BCR2 interface is required.
Check the following support site for the latest support information.
http://e-tubeproject.shimano.com

Shimano SM-PCE02 Specifications

General

Brand	Shimano
Model	SM-PCE02
Category	Bicycle Accessories
Language	English

Summary

About E-TUBE PROJECT

Connecting the SM-PCE1 / SM-PCE02

For Normal Connections

If There Are No Spare Terminals

Disconnect a cable from SM-JC40 and connect SM-PCE1 / SM-PCE02 in its place.

If the Cable is Built in the Frame

Disconnect SM-EW67-A-E cable, mount SM-JC41, connect SM-PCE1 / SM-PCE02 to spare terminal.

How to Connect SM-BCR2

Connecting to the Terminal Section

Launching and Closing E-TUBE PROJECT

Launching Requirements

E-TUBE PROJECT Functions Overview

Connection Check Function

Verifies correct connection and recognition of each unit by PC.

Customize Function

Error Check Function

Identifies units with problems by checking their operation.

Updating Firmware

Used to update firmware for each unit via the Internet.

Preset Functionality

Explains concept and methods for configuring unit settings.