Shimano SM-PCE1 User Manual

(English) HM-G.3.3.0-00
Help Manual
(General Edition)
Thank you for purchasing Shimano products.

This instruction manual explains the operation of the E-TUBE PROJECT.
Be sure to read this manual before use in order to fully utilize the
functions.

In order to use E-TUBE PROJECT, the SM-PCE1 or SM-BCR2 interface is
required.
Check the following support site for the latest support information.
http://e-tubeproject.shimano.com

Shimano SM-PCE1 Specifications

General

Quantity per pack	1 pc(s)

Summary

Connecting the SM-PCE1

For normal connections

If there are no spare terminals

If the cable is built in the frame

How to Connect SM-BCR2

Connecting to the terminal section

Each Function of E-Tube Project

Connection check

Function to verify correct connection and recognition of units.

Customize

How to adjust unit settings to suit user needs.

Error check

Process for diagnosing and identifying unit problems.

Updating firmware

Guide on how to update the firmware for individual units.

Preset

Function to save and load unit settings for bicycles.