Need help?Do you have a question about the Shimano SORA FC-R3000 and is the answer not in the manual?
General| Model | FC-R3000 |
|---|---|
| Category | Crankset |
| Series | SORA |
| Material | Aluminum |
| Crank Arm Lengths | 165mm, 170mm, 172.5mm, 175mm |
| Chain Compatibility | 9-speed |
| Crank Construction | 2-Piece |
| Bolt Circle Diameter | 110mm |
| Chainline | 43.5mm |
| Q-Factor | 146mm |
| Chainring Options | 50-34T, 52-36T |
| Compatible Chain | 9-speed |
| Bottom Bracket | HollowTech II |
Lists specific tools required for installing BB-RS500 and BB-RS501 bottom bracket models.
Lists specific tools required for installing the BB-RS500-PB bottom bracket model.
Covers the installation process for standard bottom brackets using specific tools and grease.
Details the installation of press-fit bottom brackets, including assembly and fitting procedures.
Explains how to properly install crank arms, covering alignment and tightening procedures.
Provides instructions for replacing chainrings on various SHIMANO crankset models.
To Next Page
