EasyManua.ls Logo

Shimano ST-5500-CA - User Manual

Shimano ST-5500-CA
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Technical Service Instructions SI-6C80D
ST-6510
ST-5500-CA
ST-5510
ST-R600
Shimano
Total Integration
General Safety Information
WARNING
Obtain, read and carefully service instructions when installing
parts. A loose, worn, or damaged parts may cause injury to
the rider.
We strongly recommend that only genuine Shimano
replacement parts be used.
Read these Technical Service Instructions carefully, and keep
them in a safe place for later reference.
Note
Operation of the levers related to gear shifting should be made
only when the front chainwheel is turning.
For smooth operation, always be sure to use the specified
outer casing and the bottom bracket cable guide.
Grease the inner cable and the inside of the outer casing
before use to ensure that they slide properly.
Because the high cable resistance of a frame with internal
cable routing would impair the SIS function, this type of frame
should not be used.
The end of the outer casing which has the aluminum
cap should be at the derailleur side.
Derailleur side
4-mm cap
Plastic cap or 4-mm capAluminum cap
The cycle computers shown in the table below are compatible.
Read the service instructions for the cycle computer also.
Parts are not guaranteed against natural wear or deterioration
resulting from normal use.
For maximum performance we highly recommend Shimano
lubricants and maintenance products.
For any questions regarding methods of installation,
adjustment, maintenance or operation, please contact a
professional bicycle dealer.
SM-6500
*1
/ SM-6500-RS / SM-6501
SC-6500 / SC-6501 / SC-M500
Meter unit
Bracket sensor unit
*1
The bracket cover must be replaced.
()
ST-6510 ---> Replace with bracket cover for ST-6501.
ST-5500-CA ---> Replace with ST-5500-C.
27
FD-6503
FC-6503
RD-6500-GS
Series
Shifting lever
Outer casing
Gears
Front derailleur
Front chainwheel
Bottom bracket
Rear derailleur
Freehub
Cassette sprocket
Chain
ULTEGRA
ST-6510 / ST-R600
18
SP40
FH-6500
CS-6500
CN-HG93 / CN-7701
FD-6500
FC-6500
BB-6500
RD-6500
Bottom bracket cable guide
SM-SP17
In order to realize the best performance, we recommend that
the following combination be used.
27
FD-5503 / FD-5504
FC-5504 / FC-5505
RD-5500-GS /
RD-5501-GS
Series
Shifting lever
Outer casing
Gears
Front derailleur
Front chainwheel
Bottom bracket
Rear derailleur
Freehub
Cassette sprocket
Chain
SHIMANO 105
ST-5500-CA / ST-5510 / ST-R600
18
SP40
FH-5500 / FH-5501
CS-HG70-9
CN-HG73
FD-5500 / FD-5501
FC-5501 / FC-5502
BB-5500
RD-5500 /
RD-5501
Bottom bracket cable guide
SM-SP17
t
Question and Answer IconNeed help?

Do you have a question about the Shimano ST-5500-CA and is the answer not in the manual?

Summary

General Safety Information

Safety Warnings and Notes

Covers critical safety precautions, operational notes, and usage recommendations for installation and use.

Recommended Component Combinations

Lists compatible Shimano components for optimal performance with specified shifters.

Component Operation

Rear Derailleur Lever Operation

Explains how to operate the rear derailleur levers for shifting sprockets, including multi-shift functions.

Front Derailleur Lever Operation

Details the operation of front derailleur levers for shifting chainrings and trimming functions.

Operation Cautions

Provides important warnings regarding lever interaction and simultaneous pressing to avoid damage.

Installation Procedures

Handlebar and Brake Cable Installation

Guides on mounting the shifter assembly to the handlebar and routing the brake cable.

Shifting Cable Installation Details

Covers preparation, routing, and installation of shifting cables, levers, and stoppers.

Maintenance and Repair

Bracket and Lever Disassembly

Steps for taking apart the bracket and lever components for service.

Lever and Bearing Assembly Disassembly

Instructions for disassembling the lever and bearing assembly.

Bracket and Lever Assembly

Guides on reassembling the bracket and lever components correctly after service.

Bracket Cover Replacement

Instructions for fitting and replacing the bracket cover.

Summary

General Safety Information

Safety Warnings and Notes

Covers critical safety precautions, operational notes, and usage recommendations for installation and use.

Recommended Component Combinations

Lists compatible Shimano components for optimal performance with specified shifters.

Component Operation

Rear Derailleur Lever Operation

Explains how to operate the rear derailleur levers for shifting sprockets, including multi-shift functions.

Front Derailleur Lever Operation

Details the operation of front derailleur levers for shifting chainrings and trimming functions.

Operation Cautions

Provides important warnings regarding lever interaction and simultaneous pressing to avoid damage.

Installation Procedures

Handlebar and Brake Cable Installation

Guides on mounting the shifter assembly to the handlebar and routing the brake cable.

Shifting Cable Installation Details

Covers preparation, routing, and installation of shifting cables, levers, and stoppers.

Maintenance and Repair

Bracket and Lever Disassembly

Steps for taking apart the bracket and lever components for service.

Lever and Bearing Assembly Disassembly

Instructions for disassembling the lever and bearing assembly.

Bracket and Lever Assembly

Guides on reassembling the bracket and lever components correctly after service.

Bracket Cover Replacement

Instructions for fitting and replacing the bracket cover.

Shimano ST-5500-CA Specifications

General IconGeneral
Model NumberST-5500-CA
Series105
CategoryBicycle Accessories
Brake Lever ActuationMechanical
Speeds9
MaterialAluminum
ColorSilver
CompatibilityRoad
Gear Compatibility9-speed
Weight490g
TypeDual Control Levers

Related product manuals