Shimax MAC3 Series - Page 21

21
9. Program pattern setting table
9. Program pattern setting table9. Program pattern setting table
9. Program pattern setting table Please copy and use this table according to need.
Start mode SV, PV
End step 1-25
Number of pattern execution 1～9999, ∞
100%
Time unit: min.: sec., hour: min., or hour
Output1 PID No.1
P= %
I= second 90
D= second
Differential gap =
Manual reset = %
Output limiter OL= %
OH= % 80
Output 1 PID No.2
P= %
I= second
D= second
Differential gap = 70
Manual reset = %
Output limiter OL= %
OH= %
Output 1 PID No.3
P= % 60
I= second
D= second
Differential gap =
Manual reset = %
Output limiter OL= % 50
OH= %
Output 2 PID No.1
P= %
I= second
D= second 40
Differential gap =
Manual reset = %
Output limiter OL= %
OH= %
Output 2 PID No.2 30
P= %
I= second
D= second
Differential gap =
Manual reset = % 20
Output limiter OL= %
OH= %
Output 2 PID No.3
P= %
I= second 10
D= second
Differential gap =
Differential gap =
Output limiter OL= %
OH= %
Step No.
SV (target setting value)
Time
Output 1 PID No.
Output 2 PID No.
The contents of this instruction are subject to change without notice.
 CO., LTD URL;http://www.shimax.co.jp
Head Office: 11-5 Fujimicho, Daisen-shi, Akita 014-0011 Japan Phone: +81-187-86-3400 FAX. +81-187-62-6402
Tokyo Branch: 3-44-1-208 Hayamiya, Nerima-ku, Tokyo 179-0085 Japan Phone: +81-3-5946-5575 FAX. +81-3-5946-5557
PRINTED IN JAPAN