Need help?Do you have a question about the SHIMGE JET Series and is the answer not in the manual?
General| Brand | SHIMGE |
|---|---|
| Model | JET Series |
| Category | Water Pump |
| Language | English |
Explains symbols for danger, warning, notice, prohibition, and touch, along with warranty exclusions.
Details grounding conductor connection, socket grounding, and avoiding wet plugs for electrical safety.
Advises on cutting power before touching, safe handling, and avoiding flammable or explosive liquids.
Recommends cool, dry installation and using non-flammable materials for winter protection.
Introduces mini-type clean-water electric jet pumps, their components, and unique operating principle.
Details applications like well lifting, pipe pressurization, agricultural irrigation, and domestic water supply.
Specifies ambient/medium temperature, pH range, and solid impurity limits for normal operation.
Outlines requirements for power supply voltage and frequency fluctuations.
Presents an exploded view and a detailed list of components for the JET-G1 model pump.
Displays an exploded view and a comprehensive list of parts for the JET-A model pump.
Provides an exploded view and a parts list for the SGJW model pump.
Features an exploded view and a detailed parts breakdown for the PTB model pump.
Shows wiring diagrams for single-phase and three-phase electric pumps.
Illustrates two installation methods: indirect pressurization and well water pumping.
Advises checking pump condition, cables, and insulation resistance before installation.
Guides on fixing the pump and supporting inlet/outlet pipes to prevent strain.
Details pipe connections, sealing, priming methods, and filter use for sand.
Emphasizes short test runs to prevent dry running damage and checking rotation direction.
Covers installation site, automatic control setup, pressure switch adjustment, and overload protection.
Warns against operating with a closed outlet and advises on proper disposal of packing materials.
Advises regular insulation checks and cutting power before any maintenance tasks.
Recommends inspecting bearings, seals, and impellers after 2000 hours of use.
Details air-tight testing, draining water for frost protection, and long-term storage.
States that recycling must comply with local laws and regulations concerning recycling.
Lists causes and remedies for motor failure, no water flow, and insufficient flow.
Provides solutions for unexpected pump shutdowns and motor overload conditions.
Explains troubleshooting for burnt stator windings and coil short circuits.
Offers remedies for pump noise and includes notes on diagrams and product improvements.
To Next Page
