1. Caution before Use
In order to use this controller safely and to use ite function to the maximun
be sure to refer to the following.
a. If any damagte is discovered in the course of transportation, please contact the company.
b. This controller for exclusive use of Shinchang F/A. If it is used to object other than
the applicabe main body for its use, then it may surpass its scope of use and
may cause trouble.
c. Use this operation manual (Part's feeder)
It means <Bowl Feeder , Linear Feeder, Hopper Feeder etc.>
2. Caution at the time of use
First of all, read this manual carefully and then use it.
Be sure to observe required caution for safety as follows:
a. Dangerous
1) Do not start any work such as linear arrangement etc. until LED sign
on cotrol panel is off.
Please start the work after lapse of more than 2minutes after Off condition.
Otherwise, there is risk of electric shock.
2) Do not operate it under the condition the cover of terminal is taken off.
(Emergency case is exceptional)
And when cover of the terminal is taken off, be sure to turn off the power.
There is dange of fire due to electric shock or short-circuiting.
3) Never do any wiring works without turning off the electric power.
This controller is exclusive controller for Part's Feeder.
It can not be used for piezo electric Part's Feeder or single phase motor etc.
There is dange of fire due to electric shock or short-circuiting.
To Next Page
Loading...