To Next PageTo Next PageHow to improve low efficiency of cooling or heating for my Shinco KFR-50GWZ/BM?
If your Shinco Air Conditioner has low efficiency of cooling or heating, it might be because the air filters are too dirty, or the intake or outlet vent is blocked up. In heating operation, defrosting operation may be required if the ambient temperature is too low.
What to do if my Shinco Air Conditioner does not work?
If your Shinco Air Conditioner isn't working, there might be a problem with the remote control or the voltage. Try shutting off the power, waiting 3 minutes, and then restarting the unit. Also, verify the circuit breaker or fuse.
Why is my Shinco KFR-50GWZ/BM not blowing warm air in heating mode?
If your Shinco Air Conditioner isn't blowing warm air in heating mode, it might be because the compressor is in a delay mode. To protect the compressor, there's a delay of several minutes every time it starts. Please wait a few minutes after starting the unit. Also, the hot air will be blown out only after the defrosting operation.
What to do if I see abnormality on the remote control screen of my Shinco Air Conditioner?
If you notice an abnormality on the remote control screen of your Shinco Air Conditioner, the batteries might need to be replaced, or they might be inserted incorrectly. Take the batteries out and insert them again.
Why is my Shinco KFR-50GWZ/BM Air Conditioner leaking cold water?
Cold water leaking from your Shinco Air Conditioner may be due to moisture occurring at the air outlet because of the temperature difference.
Why is my Shinco KFR-50GWZ/BM making noise?
The noise coming from your Shinco Air Conditioner could be due to a water leak sound, which is the sound of the circulation of refrigerant. In heating operation, during defrosting, it is the sound of the back-flow refrigerant because of condensed air leaking out.
General| Brand | Shinco |
|---|---|
| Model | KFR-50GWZ/BM |
| Category | Air Conditioner |
| Language | English |
Highlights the stable performance, high efficiency, energy-saving, and quiet operation of the unit.
Details safety measures and warnings specific to the installation process of the air conditioner.
Outlines essential safety guidelines and prohibitions for operating the air conditioner.
Details the parts and functions of the indoor and outdoor units.
Explains the functions and operation of the remote control unit.
Covers battery installation for the remote and setting the unit's clock.
Instructions for adjusting wind speed/direction and setting timers.
Details Cooling, Heating, Dehumidify, Ventilator, and Drying modes.
Explains Auto, Powerful, and Sleep modes for enhanced comfort and efficiency.
Covers switching between Celsius/Fahrenheit and using sensor switching mode.
Provides instructions for cleaning the remote control and the intake vent grill.
Details the steps for cleaning the air filter every two weeks.
Guidelines for choosing the optimal placement for the indoor and outdoor units.
Steps for fixing the wall-mounted plate and installing the indoor unit.
Procedure for drilling wall holes and connecting the power source.
Instructions for correctly installing the drain hose for proper water removal.
Details on installing the outdoor unit on a solid base and required clearances.
Guidance on creating secure pipe joints and performing flare work for connections.
Steps for connecting the thick and thin pipes to the indoor and outdoor units.
Details on routing the outdoor drain hose and using insulation materials.
Guidelines for correctly connecting the electrical wires between units.
Instructions for connecting the exterior drain pipe for water drainage.
Procedure for cleaning pipes and verifying the system for leaks.
Steps for performing functional tests of heating and cooling modes.
Guidance for service technicians to explain operations and advise consumers.
