To Next PageTo Next PageHow to improve low efficiency of cooling or heating for my Shinco KFR-70GWZ/BM Air Conditioner?
If your Shinco Air Conditioner has low efficiency of cooling or heating, it might be because the air filters are too dirty, or the intake or outlet vent is blocked up. In heating operation, defrosting operation may be required if the ambient temperature is too low.
What to do if my Shinco Air Conditioner does not work?
If your Shinco Air Conditioner isn't working, there might be a problem with the remote control or the voltage. Try shutting off the power, waiting 3 minutes, and then restarting the unit. Also, verify the circuit breaker or fuse.
Why is my Shinco KFR-70GWZ/BM not blowing warm air in heating mode?
If your Shinco Air Conditioner isn't blowing warm air in heating mode, it might be because the compressor is in a delay mode. To protect the compressor, there's a delay of several minutes every time it starts. Please wait a few minutes after starting the unit. Also, the hot air will be blown out only after the defrosting operation.
What to do if I see abnormality on the remote control screen of my Shinco Air Conditioner?
If you notice an abnormality on the remote control screen of your Shinco Air Conditioner, the batteries might need to be replaced, or they might be inserted incorrectly. Take the batteries out and insert them again.
Why is my Shinco KFR-70GWZ/BM Air Conditioner leaking cold water?
Cold water leaking from your Shinco Air Conditioner may be due to moisture occurring at the air outlet because of the temperature difference.
Why is my Shinco KFR-70GWZ/BM Air Conditioner making noise?
The noise coming from your Shinco Air Conditioner could be due to a water leak sound, which is the sound of the circulation of refrigerant. In heating operation, during defrosting, it is the sound of the back-flow refrigerant because of condensed air leaking out.
General| Brand | Shinco |
|---|---|
| Model | KFR-70GWZ/BM |
| Category | Air Conditioner |
| Language | English |
Highlights the key capabilities and benefits of the air conditioner.
Specific safety guidelines for unit installation to prevent hazards.
Essential safety rules for operating the air conditioner to prevent accidents.
Identifies and describes indoor and outdoor unit parts.
Explains all functions and buttons on the remote control.
Covers battery installation and setting the clock on the remote.
How to adjust wind speed, direction, and set timers.
Details Cooling, Heating, and Dehumidify modes for operation.
Explains Auto, Powerful, and Sleep modes for enhanced comfort.
Covers temperature units, sensor mode, and general maintenance.
Instructions for cleaning air filters and tips for energy efficiency.
Guidelines for selecting the proper location for unit installation.
Steps for mounting the indoor unit, including the wall-mounted plate.
Covers drilling wall holes, power source, and drain hose installation.
Guides on arranging and securing refrigerant and drain pipes.
Details on flared and pipe joints for connecting the outdoor unit.
Connecting pipes to units and managing the drain hose.
Correctly connecting the unit's electrical wires according to the diagram.
Verifying connections and preparing for the test run.
Steps for performing a test run and final checks after installation.
