To Next PageTo Next PageWhat to do if Shinco Air Conditioner is not cooling room?
If your Shinco Air Conditioner isn't cooling the room, try these steps: first, make sure the mode is set to COOL. Then, remove any obstructions or debris that might be blocking airflow. Eliminate any nearby heat sources that could be affecting the unit's performance. Clean the strainers. Finally, adjust the temperature and select an appropriate fan speed.
What to do if my Shinco SPAE12W Air Conditioner does not work?
If your Shinco Air Conditioner isn't working, try the following: Ensure the power button is switched to the 'ON' position and that the power plug is properly inserted into the outlet. Check the fuse and replace it if necessary, or try using a different outlet. Review the TIMER settings. Also, make sure to drain out any accumulated water.
General| Brand | Shinco |
|---|---|
| Model | SPAE12W |
| Category | Air Conditioner |
| Language | English |
Key restrictions and warnings on usage to prevent hazards and damage.
Detailed description of the purpose and operation of each control panel button.
Explanation of each button on the remote control and its corresponding function.
Instructions for using the COOL mode, including temperature and fan speed settings.
Explanation of condensation, water bucket full indicator, and alarm.
Step-by-step guide for manually draining accumulated water from the unit.
Table outlining common problems, checks, and their corresponding solutions.
List of detection codes, their meanings, and associated cautions.
Steps for connecting the flexible venting hose and attaching the window sealplate assembly.
