- - 12 - -
Operation
Timer setting
Setting Automatic OFF Timer
While the air conditioner is on, press the TIMER button which will put
you in the TIMER mode and the LED temperature gauge will flicker
“ ” 5 times.
You can press the UP/DOWN buttons to cycle through and adjust the
desired OFF time by 30 minute Increments up to 3 hours, and then 1
hour increments from 3 hours up to 24 hours.
When the set time expires, the air conditioner turns off automatically.
Setting Automatic ON Timer
While the air conditioner is off, press the TIMER button which will put
you in the TIMER mode and the LED temperature gauge will flicker
“ ” 5 times.
You can press the UP/DOWN buttons to cycle through and adjust the
desired ON time by 30 minute Increments up to 3 hours, and then 1
hour increments from 3 hours up to 24 hours.
After setting the timer, select the desired operating mode. If set for
COOL mode, you can adjust the set temperature.
After the set time expires, the air conditioner starts automatically and
runs in the selected operating mode.
Adjusting the Timer
If you need to change or adjust the ON or OFF TIMER after it has been
set, press the TIMER button which will put you in the TIMER mode and
the LED temperature gauge will flicker the remaining time left on the
timer.
You can press the UP/DOWN buttons to cycle through and adjust the
remaining time by 30 minute Increments up to 3 hours, and then 1 hour
increments from 3 hours up to 24 hours.
If you press TIMER again during this time, the timer will be cancelled.
NOTE
1. In FAN modes, you need not use exhaust pipe.
2. If your room faces the sun directly, please draw the curtains to increase efficiency
of your air conditioner.
To Next Page
Loading...
Need help?
General
