How to improve low efficiency of cooling or heating for my Shinco KFR-70GWZ/BM Air Conditioner?
If your Shinco Air Conditioner has low efficiency of cooling or heating, it might be because the air filters are too dirty, or the intake or outlet vent is blocked up. In heating operation, defrosting operation may be required if the ambient temperature is too low.
What to do if my Shinco Air Conditioner does not work?
If your Shinco Air Conditioner isn't working, there might be a problem with the remote control or the voltage. Try shutting off the power, waiting 3 minutes, and then restarting the unit. Also, verify the circuit breaker or fuse.
Why is my Shinco KFR-70GWZ/BM not blowing warm air in heating mode?
If your Shinco Air Conditioner isn't blowing warm air in heating mode, it might be because the compressor is in a delay mode. To protect the compressor, there's a delay of several minutes every time it starts. Please wait a few minutes after starting the unit. Also, the hot air will be blown out only after the defrosting operation.
What to do if I see abnormality on the remote control screen of my Shinco Air Conditioner?
If you notice an abnormality on the remote control screen of your Shinco Air Conditioner, the batteries might need to be replaced, or they might be inserted incorrectly. Take the batteries out and insert them again.
Why is my Shinco KFR-70GWZ/BM Air Conditioner leaking cold water?
Cold water leaking from your Shinco Air Conditioner may be due to moisture occurring at the air outlet because of the temperature difference.
Why is my Shinco KFR-70GWZ/BM Air Conditioner making noise?
The noise coming from your Shinco Air Conditioner could be due to a water leak sound, which is the sound of the circulation of refrigerant. In heating operation, during defrosting, it is the sound of the back-flow refrigerant because of condensed air leaking out.
General| Brand | Shinco |
|---|---|
| Model | KFR-70GWZ/BM |
| Category | Air Conditioner |
| Language | English |
To Next Page
