Shindaiwa EB252 - User Manual

X7501190200
© 9/2017 ECHO Inc.
ENGLISH
Specifications, descriptions and illustrative material in this literature are
as accurate as known at the time of publication, but are subject to
change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
Operator’s Manual
EB252
Power Blower
Burn Hazard
The muffler or catalytic muffler and surrounding cover
may become extremely hot. Always keep clear of ex-
haust and muffler area, otherwise serious personal in-
jury may occur.
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects or
other reproductive harm.
Users of this equipment risk injury to themselves and
others if the unit is used improperly and/or safety
precautions are not followed. ECHO provides an
operator’s manual. It must be read and understood for
proper and safe operation. Failure to do so could result in
serious injury.

Summary

Introduction and Servicing Information

Servicing Information

Information on parts, serial numbers, and authorized service dealers.

Safety and Personal Protection

Personal Condition and Safety Equipment

Safe Operation Practices

Equipment Safety Warnings

Moving Parts Safety

Safety precautions when working near moving parts during maintenance or operation.

Assembly Instructions

Install Blower Pipes

Step-by-step instructions for attaching the blower pipes to the unit.

Install Blower Pipes (continued)

Further steps for aligning and securing blower pipes with locking channels.

Operation Procedures

Remove Blower Pipes

Stopping Engine and Operating Blower

Moving Parts Safety Warning

Reinforces safety precautions regarding moving parts during operation or servicing.

Operation Procedures

Fire and Exhaust Hazards

Two Stroke Oil Requirements

Fuel Mixing and Storage Guidelines

Instructions for mixing fuel, storage, and disposal of waste.

Starting Cold Engine

Step-by-step guide for starting a cold engine, including safety tips.

Starting Warm Engine

Procedure for starting a warm engine, noting differences from cold start.

Fuel Requirements

Specifications for approved gasoline and oil mixture for the engine.

Handling Fuel Safely

DANGER warning regarding fuel flammability and safe handling practices.

Operation Procedures

Speed Control and Usage Notices

Maintenance Procedures

Maintenance Safety and Skill Levels

Fuel Filter and Spark Plug Servicing

Steps for replacing fuel filter and servicing spark plug, including notes and warnings.

Maintenance Intervals and Procedures

Table outlining scheduled maintenance tasks, procedures, and required skill levels.

Cooling System Maintenance

Maintenance Procedures

Throttle Connecting Rod Lubrication

Maintenance Procedures

Air Filter Maintenance

Cleaning Air Intake and Discharge Grills

Cylinder Fins and Exhaust System

Fuel Filter Maintenance

Carburetor Adjustment and High Altitude

Troubleshooting Engine Issues

Idle Speed Adjustment Procedure

Fuel Vapor Hazard Warning

DANGER warning about fuel vapor flammability and safe ignition testing practices.

Troubleshooting Engine Issues

Engine Problem Troubleshooting Chart

A comprehensive chart listing common engine problems, their causes, and remedies.

Storage Guidelines

Long Term Storage Procedures

Product Specifications

EB252 Model Specifications

Table detailing technical specifications like length, width, weight, engine type, and displacement.

Product Registration

Register Your Shindaiwa Product

Shindaiwa EB252 Specifications

General

Engine Type	2-stroke
Air Volume	680 m³/h
Air Speed	87 m/s
Displacement	25.4 cc
Fuel Tank Capacity	0.6 L