Need help?Do you have a question about the Shining 3D AccuFab-D1s and is the answer not in the manual?
Introduces the AccuFab-D1s printer, its functions, installation, operation, and maintenance.
Provides critical safety warnings and precautions for using the printer and its materials.
Details the version history and update content of the user manual.
Outlines FCC compliance information related to the device's radio frequency emissions.
Information regarding radio frequency exposure limits set by the FCC for the device.
Explains the manual's purpose, intellectual property rights, and user responsibilities.
Guidelines for safe handling of resin materials, including skin, eye, and ingestion precautions.
Warning about potential eye damage from ultraviolet light emitted during operation.
Safety information regarding the use and storage of ethanol for cleaning purposes.
Precautions for using sharp tools provided with the printer for safety.
Information on the printer's compliance with electromagnetic interference standards.
Specifies the necessary environmental conditions and power requirements for the printer and curing unit.
Recommendations for storing resin materials to maintain stability and safety.
Notes on using original consumables and keeping the printer's hood closed during operation.
Visual diagram and labels for the main components of the AccuFab-D1s 3D printer.
Lists and illustrates all accessories included with the AccuFab-D1s printer package.
Step-by-step instructions for safely unpacking the AccuFab-D1s printer and its accessories.
Guide on connecting the printer, installing the resin tank, and placing the build platform.
Instructions on how to properly add resin material to the printer's resin tank.
Overview of the FabWare home screen, showing printer status and environment information.
Description of the queue page for managing print jobs and viewing print history.
Overview of software and hardware settings available within the FabWare interface.
Instructions for connecting the printer to LAN or wireless networks for file transfer.
Details methods for updating the FabWare software and material profiles online and offline.
Steps to activate the printer license if it expires or printing is restricted.
Overview of the printing process steps: setup, print, and post-processing.
Instructions for checking and changing resin tank settings within FabWare.
Step-by-step guide for leveling the build platform to ensure print success.
Function to clean residue from the resin tank after a print failure.
Methods for sending print files to the printer via flash drive or network, including local and flash drive printing.
How to monitor printing progress, pause, and cancel print jobs directly on the printer.
Steps to safely remove the printed model from the build platform after printing is complete.
Instructions for cleaning the printed model and the build platform after printing.
Process for curing printed models to enhance performance and surface properties.
Guidelines for removing support structures from the printed model.
General| Technology | DLP |
|---|---|
| Supported File Formats | STL, OBJ, 3MF |
| Software | AccuWare |
| Layer Thickness | 25-100 μm |
| Light Source | UV LED 405 nm |
| Print Speed | Up to 30 mm/h |
| Connectivity | Wi-Fi, Ethernet, USB |
| Operating System Compatibility | Windows 7/8/10 |
| Power Requirements | 100-240 V, 50/60 Hz |
To Next Page
