Shinko BCR2 User Manual

1
COMMUNICATION INSTRUCTION MANUAL BCD2, BCR2, BCS2 (C5W, C5)
No. BCx2CE5 2018.02
This manual contains instructions for communication functions of the BCD2, BCR2, BCS2.
Serial communication and Console communication cannot be used together.
When performing Serial communication, remove the tool cable (CMD-001) from the USB port of the PC and
console connector of the BCD2, BCR2, BCS2.
When performing Console communication, it is not required to remove the Serial communication cables.
However, do not send a command from the master side.
1. System Configuration
1.1 When Using USB Communication Cable CMC-001-1 (sold separately)
(Fig. 1.1-1)
1.2 When Using Communication Converter IF-400 (sold separately)
(Fig. 1.2-1)
USB communication cable
CMC-001-1 (sold separately)
No. 0 No. 1 No. 30
BCS2
Host computer
Communication converter
IF-400 (sold separately)
RS-232C RS-485
No. 0
No. 1
No. 30
BCS2
Host computer

Shinko BCR2 Specifications

General

Control Method	PID Control
Input Type	Thermocouple, RTD, Analog
Output Type	Relay, SSR, Analog
Power Supply	100-240V AC, 24V DC
Communication	RS-485
Size	1/16 DIN
Dimensions	48x48mm