INSTRUCTION MANUAL
Micro-computer based Temperature Indicating Controller FCL-100
No.FCL11E3 2000.11
To prevent accidents arising from the use of this controller, please ensure the operator using it receives
this manual.
Warning
Turn the power supply to the instrument OFF before wiring or checking.
Working or touching the terminal with the power switched ON may result in Electric Shock,
which can cause severe injury or death.
1. Model names
1.1 FCL-130
F C L - 1 3 0 - / E , FCL-100 (W48 x H24 x D98.5mm)
Temperature alarm 0 No alarm action
R Relay contact
S Non-contact voltage (for SSR drive)
Control output
A Current (4 to 20mAdc)
Input E TC multi-range input, or TC K type only
TC Terminal cover
Option
BK Color, black
0 to 400
0.0 to 400.0
0 to 750
Range
0.0 to 750.0
The range designation is required for TC
(thermocouple) K type only.
(Changeable by the key operation.)
Temperature alarm action is not equipped for the FCL-130 type.
There are 2 input types for the FCL-130; TC (thermocouple) multi-range input and TC K type only.
The options applicable to the FCL-130 are [TC] and [BK].
When ordering:
Choose a type from the table above with alphanumeric characters.
Enter a rated scale (only for the TC K type) and supply voltage using a comma (,).
1.2 FCL-13A
F C L - 1 3 A - / , FCL-13A (W48 x H24 x D98.5mm)
Te mperature alarm A
Alarm action applied
R Relay contact
S Non-contact voltage (for SSR drive)
Control output
A Current (4 to 20mAdc)
M Multi-range input
Input
E TC K type only
C5 Serial communication RS-485
W( 5A) Rated current: 5A
W(10A) Rated current: 10A
W(20A) Rated current: 20A
W(50A)
Heater burnout
alarm
Rated current: 50A
SM Setting value memory (external selection)
TC Terminal cover
Option
BK Color, black
0 to 400
0.0 to 400.0
0 to 750
Range
0.0 to 750.0
The range designation is required for TC
(thermocouple) K type only.
(Changeable by the key operation.)
There are 2 input types for the FCL-13A; Multi-range input and TC K type only.
To Next Page
Need help?
General
