Shinybow USA 4:1 Series - User Manual

The document describes the HDMI 4:1 Switcher + IR + Rs232, available in two models: Model 5604 (4:1 HDMI SWITCHER) and Model 5605 (4:1 HDMI-Optical-Digital SW). The manual focuses primarily on the Model 5605, which is a more advanced version.

Function Description:

The SB-5605 is a high-definition digital switcher designed for HDMI, Optical, and Digital Audio signals. It allows users to connect up to four HDMI sources and route one selected source to a single HDMI output. Additionally, it provides optical and digital audio outputs, making it suitable for integration with audio amplifiers and home theater systems. This device eliminates the need to constantly re-plug HDMI cables when switching between different sources. It is ideally suited for High Definition LCD Televisions, Plasma displays, multi-input displays, projectors, A/V receivers, set-top boxes, and advanced television (HDTV) sets.

Important Technical Specifications (Model 5605):

• Type of Switcher: 4 inputs, 1 output HDMI Switcher.
• Signal Switch:
  • 1. HDMI (TMDS)
  • 2. Optical (S/PDIF)
  • 3. Digital Audio (PCM)
• Date Rates: 250Mbps~1.65Gbps.
• Pixel Clocks: 25MHz~165MHz.
• Compatibility: HDMI/HDCP Standard compatible.
• Terminator: HDMI sockets.
• Cable Distance: Up to 20 Meters at 1080p.
• Power Consumption: 300mA Maximum.
• Power Source: DC+12V, @500mA~1250mA.
• Input: 4x HDMI.
• Output: 1x HDMI.
• Power Input: DC +12V, @500mA~1250mA.

Usage Features:

The SB-5605 offers flexible control options:

1. IR Remote Controller: A dedicated IR remote is included for convenient wireless control.
2. Manual Control: Front panel push buttons (Input 1, 2, 3, 4) allow for direct selection of the desired HDMI source. The front panel also features LED readouts to indicate the currently active input.
3. RS232 PC Control: An RS232 interface is provided for integration with third-party control systems or a PC. A Windows-based control software package is included to provide complete control of the SB-5605 from a computer.

The device can operate in three modes based on the selected control method. When in Manual mode, users can toggle through inputs AV1, AV2, AV3, or AV4 by repeatedly pressing the Input Channel button. If multiple devices are connected but only one is powered on, the switcher can automatically detect and select that active source.

Typical Hookup and Operation:

• Front Panel: Features input select buttons (1-4) and a power switch (ON/OFF).
• Rear Panel: Includes HDMI inputs, HDMI output, Optical output, Digital output, RS232 port for PC control, and a DC 12V power input.
• Connectivity: Connect HDMI sources (e.g., HDMI players) to the HDMI inputs. Connect the HDMI output to a display (e.g., HDTV). For audio, connect the Optical or Digital output to an audio amplifier or S/PDIF/Digital input.

Maintenance Features / Safeguards and Precautions:

• Environmental: Keep the unit away from fire, extremely hot areas, water, or moisture.
• Placement: Do not place the unit on any support that is not firm, level, and strong.
• Servicing: Do not attempt to service the unit yourself, as opening the housing will void the warranty. Servicing must be performed by Shinybow or an authorized technician.
• Power: Use only the supplied AC Adaptor and ensure proper power connections to prevent damage to television equipment.
• Copyright: Illegal duplication of copyrighted material is strictly prohibited by Federal Laws.
• Initial Setup: Before making connections, ensure all AV devices are functioning according to their respective operation manuals. Connect video/audio devices to the HDMI Routing Switcher one at a time and verify each works as expected before proceeding.

Supplied Accessories:

• 1 Instruction Manual
• 1 SB-5605 Switcher
• 1 IR Remote Controller
• 1 AC/DC Adaptor: 12VDC, @500mA~1250mA