Shire Cubby - Base and Warranty; Preparation of Base; Warranty Terms

Getting Started…..
GB
IE
04
Cubby playhouse
Base and Warranty
The following are also excluded
 Damage resulting from poor assembly
 Poor treatment application
 Poor care and maintenance
 Changes to the design
 Misuse
 General wear and tear
Warranty...
10 Year anti rot warranty subject to the following -
 The building must be raised so it is not in contact with any water
retaining base surface (for example grass).
 This can be achieved using a timber, concrete or slab base
 When using a concrete or slab base use damp proofing strips
under the bearers
 The building must have been completely treated and sealed
immediately prior to or after assembly
 The building must have been re-treated and re-sealed annually
 If your building has been pressure treated or has any pressure treated
parts additional treatment need not be applied (except for aesthetic
purposes )
 Wood is a natural product and therefore the following are excluded
from the warranty
Colour changes
Warping
Preparation of base...
We recommend that the base onto which your building will stand should be at least
75mm larger in each direction than the total floor size of the building.
Actual floor area of the building: 1790 x 1190mm (excluding canopy)
Roof Overhang of canopy: 480mm
Total height clearance: 1750mm