To Next PageTo Next Page
Need help?Do you have a question about the Shire Cubby and is the answer not in the manual?
Essential safety guidelines for assembly and use.
Recommendations for preparing the base for the playhouse.
Details of the product's warranty terms and coverage.
Recommendations for building a stable and correctly sized base for the playhouse.
Details of the 10-year anti-rot warranty and exclusions.
Ensuring the base is ready, parts are checked, and instructions are read.
List of essential tools needed for the assembly process.
Five key principles for looking after the playhouse.
Seven important guidelines for regular upkeep of the playhouse.
Information on how to recycle and dispose of packaging and building components.
Attaching door architraves and fitting plastic glazing to the door.
Attaching hinges, ring handle, and wooden knob to the door.
Laying and attaching the door panel to the door frame.
Rebating the window insert for proper fit and EN71 compliance.
Positioning and fitting the window hinges to the window insert.
Securing the window insert using screws after initial positioning.
Loosely fitting casement stays and pins, then marking and fixing pins.
Attaching floor panels and side/back wall panels to the frame.
Continuing to add and fix side-plain wall panels to the structure.
Fixing the front and back gable panels to the main framework.
Inserting safety vents into the pre-drilled holes in the back gable panel.
Positioning and nailing roof framework onto the roof panels.
Cutting centre roof framework pieces for the roof peak.
Placing and aligning roof panels on the building structure.
Holding and nailing the roof panels together to secure them.
Positioning and nailing roof panels to the building walls.
Fitting cover strips at each corner of the roof with nails.
Attaching veranda posts to veranda rails, ensuring mirror images.
Attaching L brackets to each veranda rail for stability.
Aligning veranda posts to the roof underside and trimming as necessary.
Positioning and fixing the rail assembly, including L brackets, to the roof and wall.
Fitting roof felt strips, overlapping and securing them with nails.
Attaching fascia and flat bottom diamond pieces to the gable framework.
Removing protective film and fitting beading and plastic glazing.
Attaching the roller catch and door catch block to the door and frame.
Fixing the assembled walls securely to the floor using screws.
General