Shire Cubby - Fascia and Diamond Fitting; Beading and Glazing

24
23
GB-IE Make sure the nails go into the gable framework avoiding the felt nails.
GB-IE Remove the protective film from both sides of the plastic glazing before fitting.
Panel pin
(PP 16mm) x64
Beading
(8.5B-205)X32
Plastic Glazing
(PX-203-203) x08
F&B Fascia
(70FC-1070)2 &2
Nail
(40mm) x16
Flat bottom diamond
(DI-FB)-70x02
1mm
Front Back
8.5mm
8.5mm

203mm
203mm
23
Building
Photographs
It will be greatly
appreciated if you could
forward images of your
completed
building to -
sales@shiregb.co.uk.