To Next PageTo Next PageWhy is my Shop-Vac Vacuum Cleaner losing suction?
Loss of suction in your Shop-Vac Vacuum Cleaner can occur due to several reasons: * A loose hose connection. Try tightening the hose connection. * A clogged filter. Clean or replace the filter. * A full tank. Empty the tank. * A hole in the hose. Replace the hose.
What to do if my Shop-Vac Vacuum Cleaner is discharging dust from the exhaust?
If your Shop-Vac Vacuum Cleaner is discharging dust from the exhaust, it could be due to: * The filter is not installed or not installed properly. Properly install the filter. * The filter is damaged. Replace the filter. * The filter is clogged, or the dust is too fine. Use a more efficient filter. * The filter is not functional. Clean or replace the filter.
Why am I getting static shock from my Shop-Vac Vacuum Cleaner?
Static shock from your Shop-Vac Vacuum Cleaner can happen because of a dry environment. Try to add moisture to the air, if practical, by using a console or installed humidifier. If the relative humidity of the air is low, this situation is temporary and does not affect the use of the vacuum cleaner.
General| Brand | Shop-Vac |
|---|---|
| Model | 4045AH |
| Category | Vacuum Cleaner |
| Language | English |
Assemble the caster system by inserting casters into the bottom of the dolly.
Attach the side tank handles to the vacuum tank using the provided screws.
Install and remove the cartridge filter for dry or wet pick up and fine dust.
Install and remove the tear resistant wet/dry collection bag for debris or liquids.
Install the disposable filter bag for dry pick up of specific dusts like cement and plaster.
Use foam sleeve for wet pick up, manage filter saturation and empty tank when full.
