What to do if my Shoprider Wheelchair displays 'Low battery voltage'?
If your Shoprider Wheelchair indicates a low battery voltage, charge the batteries immediately. Do not operate the powerchair until the batteries are fully charged.
What to do if the charger of my Shoprider Wheelchair does not come on when plugged in?
If the charger for your Shoprider Wheelchair doesn't turn on when plugged in, check the charger fuse, if applicable, then call your provider for assistance.
What to do if my Shoprider Wheelchair says 'Battery charger connected'?
If your Shoprider Wheelchair indicates that the battery charger is connected, unplug the charger.
What to do if my Shoprider 6Runner 10 shows 'Possible joystick fault'?
If your Shoprider Wheelchair indicates a possible joystick fault, ensure the joystick is centered when the controller is turned on. If the problem persists, call your Shoprider provider for assistance.
What to do if my Shoprider 6Runner 10 Wheelchair displays 'Battery voltage is too high'?
If your Shoprider Wheelchair indicates that the battery voltage is too high, check the battery connections and then call your Shoprider provider for assistance.
What to do if my Shoprider 6Runner 10 Wheelchair shows 'Right-hand motor wiring fault'?
If your Shoprider Wheelchair indicates a right-hand motor wiring fault, check the connections and then call your Shoprider provider for assistance.
What to do if my Shoprider 6Runner 10 shows 'Left-hand motor wiring fault'?
If your Shoprider Wheelchair indicates a left-hand motor wiring fault, check the connections and then call your Shoprider provider for assistance.
What to do if my Shoprider 6Runner 10 Wheelchair indicates 'Right-hand motor disconnected'?
If your Shoprider Wheelchair indicates that the right-hand motor is disconnected, check the connections and then call your Shoprider provider for assistance.
What to do if my Shoprider 6Runner 10 Wheelchair indicates 'Left-hand motor disconnected'?
If your Shoprider Wheelchair indicates that the left-hand motor is disconnected, check the connections and then call your Shoprider provider for assistance.
What to do if my Shoprider 6Runner 10 displays 'Possible controller fault'?
If your Shoprider Wheelchair indicates a possible controller fault, check the controller connector and then call your Shoprider provider for assistance.
Lists crucial warnings to prevent unintended powerchair movement or brake release due to EMI.
Lists fault codes indicated by battery gauge flashes and their possible VSI-50 faults.
General| Brand | Shoprider |
|---|---|
| Model | 6Runner 10 |
| Category | Wheelchair |
| Language | English |
To Next Page