What to do if my Shoprider COUGAR 10 Wheelchair shows 1 Bar flash?
If your Shoprider Wheelchair shows 1 Bar flash, immediately charge the batteries and do not drive the wheelchair until the batteries are fully charged.
What to do if my Shoprider COUGAR 10 Wheelchair charger does not come on when plugged in?
If your Shoprider Wheelchair charger does not come on when plugged in, check the charger fuse (if applicable) and then call your provider.
What to do if my Shoprider COUGAR 10 Wheelchair charger light goes to green quickly and doesn't charge?
If the charger indicator light goes to green within a few minutes after being plugged in and doesn’t charge the batteries on your Shoprider Wheelchair, the batteries may be over discharged. Contact your provider for assistance.
Why is my Shoprider COUGAR 10 flashing 10 bars?
If your Shoprider Wheelchair is flashing 10 bars, it indicates that the battery voltage is too high. Check the battery connections and then call your Shoprider Provider.
Why does the charger light on my Shoprider COUGAR 10 Wheelchair immediately turn green when I plug it in?
If the charger indicator light on your Shoprider Wheelchair immediately turns green when plugged in to charge, it is likely due to a blown fuse or popped circuit breaker. Contact your provider for assistance.
What does it mean when my Shoprider COUGAR 10 flashes 5 bars?
If your Shoprider Wheelchair flashes 5 bars, it indicates a right-hand motor wiring fault. Check the connections and then call your Shoprider Provider.
Why is my Shoprider COUGAR 10 Wheelchair flashing 4 bars?
If your Shoprider Wheelchair is flashing 4 bars, it means the right-hand motor is disconnected. Check the connections and then call your Shoprider Provider.
What does it mean when my Shoprider COUGAR 10 flashes 3 bars?
If your Shoprider Wheelchair flashes 3 bars, it indicates a left-hand motor wiring fault. Check the connections and then call your Shoprider Provider.
Why is my Shoprider Wheelchair flashing 2 bars?
If your Shoprider Wheelchair is flashing 2 bars, it means the left-hand motor is disconnected. Check the connections and then call your Shoprider Provider.
What to do if my Shoprider COUGAR 10 Wheelchair flashes 7 bars?
If your Shoprider Wheelchair flashes 7 bars, be sure the joystick is at the center when the controller is turned on, and then call your Shoprider Provider.
Explains EMI's impact on power chairs and lists warnings to prevent interference and ensure safety.
Instructions for charging batteries before first use to ensure proper efficiency and battery life.
Details the seat and armrest features, including reclining back and adjustable armrests for comfort and access.
Explains how the footplate adjusts for user comfort and stability, with details on adjustment pins.
Describes seat height adjustment mechanisms and provides guidance on accessing the powerchair's batteries.
Provides step-by-step instructions for locking and unlocking the VSI joystick controller for security.
Information on tire care for flat-free tires and when replacement is recommended due to tread wear.
Guidelines for inspecting bolts, lubrication of components, and cleaning of driving axles and castor assemblies.
Step-by-step guide on charging the powerchair, including indicator light meanings and important warnings.
Troubleshooting common battery and charging issues, including indicator light behavior and potential causes.
Details the 3-year warranty for the structural frame, including repair/replacement conditions.
Outlines the 18-month warranty for the drive train assembly, covering components like transaxle, motor, and brake.
Covers the 12-month warranty for other parts of the powerchair, including repair/replacement procedures.
Lists items not covered by the warranty, such as transport costs, normal wear items, and damage from misuse.
General| Brand | Shoprider |
|---|---|
| Model | COUGAR 10 |
| Category | Wheelchair |
| Language | English |
To Next Page