The ShoreStation SS1062, SS10621, and SS10621E are free-standing hoists designed for personal watercraft (PWC) and fishing boats. These models offer robust construction and various features to ensure safe and convenient lifting and storage of watercraft.
Function Description:
The primary function of these ShoreStation hoists is to provide a stable and secure platform for lifting and storing PWCs and fishing boats out of the water. This protects the watercraft from damage due to prolonged water exposure, marine growth, and environmental elements. The free-standing design allows for flexible placement in various waterfront settings. The SS1062 is a basic free-standing hoist, while the SS10621 is a free-standing hoist specifically for PWC and fishing boats. The SS10621E is an enhanced version of the SS10621, featuring an electric drive winch for automated operation.
Important Technical Specifications:
Bundles Required (Components):
- SS1062 (Free Standing Hoist):
- Platform Bundle (63701)
- Wheel Assembly, 30" (6498901)
- Lower Frame (68145)
- Hardware Box (68155)
- Leg Bundle (68154)
- SS10621 (Free Standing Hoist for PWC & Fishing Boats):
- Platform Bundle (63701)
- Wheel Assembly, 30" (6498901)
- Lower Frame (68145)
- Hardware Box (68146)
- Leg Bundle (68147)
- SS10621E (Free Standing Hoist for PWC & Fishing Boats with Electric Drive Winch):
- Platform Bundle (63701)
- Wheel Assembly, 30" (6498901)
- Lower Frame (68145)
- Hardware Box (68146)
- Leg Bundle (68147)
Lower Frame Assembly (SS1062):
- Square Base Pad (62550): 2 units
- Hoist Lower Frame RT/LT 102 IN (63109): 2 units
- Lower Corner Block 4IN Frame (65049): 2 units
- Lower Crossmember 1062 (68149): 2 units
- HH 3/8-16 X 3/4 CS GR5 (0110038): 4 units
- HH 3/8-16 X 4 1/2 CS GR5 (0110062): 16 units
- HH 1/2-13 X 4 1/2 CS GR5 (0110118): 2 units
- Washer USS Flat 3/8 (1340095): 16 units
- Hex Locknut Flange 3/8-16 W/T&T (1440101): 20 units
- Hex Locknut Flange 1/2-13 W/T&T (1440102): 2 units
- Black Plastic Cap (3510265): 2 units
- Alum Base Pad Channel Clamp (A104): 2 units
Lower Frame Assembly (SS10621 / SS10621E):
- Square Base Pad (62550): 4 units
- Hoist Lower Frame RT/LT 102 IN (63109): 2 units
- Lower Crossmember 1062 (68149): 2 units
- HH 3/8-16 X 3/4 CS GR5 (0110038): 8 units
- HH 3/8-16 X 4 1/2 CS GR5 (0110062): 16 units
- HH 1/2-13 X 4 1/2 CS GR5 (0110118): 4 units
- Washer USS Flat 3/8 (1340095): 16 units
- Hex Locknut Flange 3/8-16 W/T&T (1440101): 24 units
- Hex Locknut Flange 1/2-13 W/T&T (1440102): 4 units
- Black Plastic Cap (3510265): 4 units
- Alum Base Pad Channel Clamp (A104): 4 units
Guide Post Assembly:
- Winch Post Tube 8521 (62647): 1 unit
- Lower Corner Block 4IN Frame (65049): 2 units
- Rub 3/8" X 3 7/8 X 4 5/8 (0310097): 2 units
- Hex Locknut Flange 3/8-16 W/T&T (1440101): 4 units
- Pin Stainless Steel W/Retainer (1540306): 1 unit
- Adjustable Leg 3 1/8OD X 30 1/2 (A102): 1 unit
- Platform Leg 852 8521 (62645): 4 units
- Sideframe PWC Platform Rail (63118): 2 units
- Front Cross 862/8621 (63694): 1 unit
- Rear Cross 862/8621 (63695): 1 unit
- Spacer Tube Wment 852/8521 (63697): 2 units
- HH 3/8-16 X 2 3/4 CS GR5 (0120052): 4 units
- HH 1/2-13 X 1 1/4 CS GR5 (0140092): 4 units
- Carr 3/8-16 X 3/4 GR5 (0210100): 8 units
- Carr 3/8-16 X 2 3/4 GR5 (0210126): 4 units
- Washer USS Flat 3/8 (1340095): 4 units
- Washer USS Flat 1/2 (1340100): 8 units
- Hex Locknut Flange 3/8-16 W/T&T (1440101): 16 units
- Hex Locknut Flange 1/2-13 W/T&T (1440102): 4 units
SS10621 Bill of Materials (Detailed):
- Platform Leg 852 8521 (62645): 4 units
- Brace Tube 852 8521 (62648): 2 units
- Bunk Bracket 852/8521 (62649): 4 units
- Bunk Assy SS862/8621 (63699): 2 units
- Pulley Bracket Wment (64965): 1 unit
- Wheel Assy 30" (64989): 1 unit
- Mounting Plate (67971): 1 unit
- Cup Washer Winches (68683): 4 units
- HH 3/8-16 X 4 1/2 CS GR5 (0110062): 3 units
- HH 3/8-16 X 5 CS GR5 (0110064): 2 units
- HH 3/8-16 X 2 3/4 CS GR5 (0120052): 4 units
- HH 3/8-16 X 1 CS GR5 (0140040): 7 units
- HH 1/2-13 X 1 1/4 CS GR5 (0140092): 4 units
- HH 1/2-13 X 3 1/2 CS GR5 (0140108): 4 units
- Carr 3/8-16 X 3/4 GR5 (0210100): 8 units
- Carr 3/8-16 X 2 3/4 GR5 (0210126): 4 units
- Sub 3/8-16 X 2 7/16 X 3 (0310087): 4 units
- Rub 3/8" X 3 7/8 X 4 5/8 (0310097): 1 unit
- Rub 3/8 X 1 3/8 X 3 1/4 (0320080): 2 units
- Eyebolt 1/2-13 X 6IN W/3/8 OPENI (1010070): 2 units
- Washer USS Flat 3/8 (1340095): 13 units
- Washer USS Flat 1/2 (1340100): 20 units
- Hex Locknut Flange 3/8-16 W/T&T (1440101): 42 units
- Hex Locknut Flange 1/2-13 W/T&T (1440102): 10 units
- Cotter Key 1/8 X 1 (1540035): 3 units
- Pin Clevis 1/2 X 2 1/4 IN (1540221): 3 units
- Winch B1500 Brake Winch (3110333): 1 unit
- Lift Cable 210" W/Loop W/Thimble (3110387): 1 unit
- Platform Pulley 2 7/8in (3510203): 3 units
- Plastic Cap 2 X 2 Square (3510267): 2 units
ShoreStation Wheel Assembly:
- Wment 30IN Wheel SSV1088 (64958): 1 unit
- Carr 3/8-16 X 3 GR5 (0210128): 2 units
- Washer Tapped 1 13/16 OD X 7GA (1310180): 2 units
- Hex Nut 3/8-16 (1410109): 2 units
- Spinner Knob (3510001): 1 unit
- Decal Up and Down Small Wheel (4811394): 2 units
- Decal Small Wheel Embossed (4850185): 1 unit
SS1226 Electric Drive Assembly:
- U Bolt Yoke SS852 (62380): 2 units
- Controller Arm Wment SS8621 (67516): 1 unit
- Motor Mount Back Plate (67519): 1 unit
- Controller Holder Wment (67531): 1 unit
- HH 3/8-16 X 5 CS GR5 (0110064): 1 unit
- HH 3/8-16 X 1 CS GR5 (0140040): 2 units
- Sub 3/8-16 X 3 7/16 X 3 (0310108): 1 unit
- Lockwasher 3/8 S/T Med Ultraseal (1340030): 2 units
- Washer USS Flat 3/8 (1340095): 5 units
- Hex Nut 3/8-16 (1410109): 2 units
- Hex Locknut Flange 3/8-16 W/T&T (1440101): 3 units
- Winch DL SA5000 Elec 6FT Control (2400019): 1 unit
Usage Features:
- Free-Standing Design: Offers flexibility in placement and does not require attachment to a dock or permanent structure, making it suitable for various waterfront configurations.
- Adjustable Legs: The adjustable leg bundles (SS8523, SS8525) allow for customization to different water depths and shoreline conditions, ensuring a level and stable platform.
- PWC & Fishing Boat Compatibility: Specifically designed to accommodate both personal watercraft and smaller fishing boats, providing a versatile solution for different types of watercraft.
- Manual Winch (SS1062, SS10621): Equipped with a robust manual winch (Winch B1500 Brake Winch) for controlled lifting and lowering of watercraft. The brake winch ensures safety by preventing accidental drops.
- Electric Drive Winch (SS10621E): Features an electric drive winch (Winch DL SA5000 Elec 6FT Control) for effortless, automated lifting and lowering, enhancing user convenience. The electric drive includes a controller arm for easy operation.
- Platform Assembly: The hoist includes a platform with sideframes and crossmembers, providing a stable base for the watercraft. Bunk brackets and bunk assemblies are included to cradle the watercraft securely.
- Wheel Assembly: The 30" wheel assembly facilitates easy movement and positioning of the hoist, especially during installation or when adjusting its location.
- Optional Accessories:
- Adjustable Leg Bundle (SS8523): For fine-tuning leg height.
- Optional Leg Bundle - 80" Legs (SS8525): For deeper water applications.
- Electric Winch Kit (SS1226): To upgrade manual hoists to electric operation (for SS1062 and SS10621).
- Canopy Frame (CF13-62) and Vinyl Canopy (CC13-62): To provide protection from sun and weather, extending the life of the watercraft.
Maintenance Features:
- Durable Construction: Built with robust materials, including aluminum frames and stainless steel components, to withstand harsh marine environments and resist corrosion.
- Organized Hardware: Hardware boxes are provided with clearly labeled components, simplifying assembly and ensuring that all necessary parts are readily available.
- Detailed Assembly Instructions: The manual provides step-by-step instructions with diagrams (Diagram V, I, IV, Detail A, B, C, F, G, H, I, J, K, M, N) for easy and accurate assembly of the lower frame, upright posts, guide posts, platform, and winch systems.
- Component Replacement: Individual parts are listed with part numbers, making it easy to identify and order replacements if needed, ensuring long-term serviceability of the hoist.
- Tightening Specifications: Instructions specify when to tighten bolts (e.g., "Do not tighten" until a later step, or "Tighten" immediately), which is crucial for structural integrity and safety.
- Plastic Caps: Black plastic caps are included for the top of the posts (Detail C, page 4), protecting the internal structure from debris and providing a finished look.
- Corrosion Resistance: The use of hex flange lock nuts, flat washers, and stainless steel pins helps prevent loosening due to vibration and enhances corrosion resistance in a wet environment.
- Cable Management: For the electric drive model, the controller arm is designed to manage the cord, keeping it organized and protected.
The ShoreStation SS1062, SS10621, and SS10621E hoists are designed for reliability, ease of use, and protection of watercraft, making them a comprehensive solution for waterfront owners.
Need help?
General
To Next Page
