ShoreStation SSV15100

Need help?

Do you have a question about the ShoreStation SSV15100 and is the answer not in the manual?

Summary

Lower Frame Assembly

Winch Post

Details of the winch post component of the lower frame assembly.

Guide Post

Details of the guide post component of the lower frame assembly.

SSV15100 Decal Placement

Maximum Load Decal

Placement of the maximum load capacity decal.

Spinning Wheel Danger Decal

Placement of the spinning wheel danger decal.

Adjustable Gauge Decal

Placement of the adjustable gauge decal.

Safety Decal

Placement of the safety instruction decal.

Directional Arrow Decal

Placement of the directional arrow decal.

Inspect Cable Caution Decal

Placement of the inspect cable caution decal.

Overview

Function Description
Important Technical Specifications
SSV15100 and SSV15100 DW Common Components
SSV15100 Specific Components
SSV15100 DW Specific Components
Detailed Component Breakdown (from Parts List)
Deep Water Leg Specifications (SSV15100 DW)
Usage Features
Maintenance Features

The ShoreStation SSV15100 and SSV15100 DW are aluminum V-frame boat hoists designed for lifting and storing watercraft. This service manual provides detailed information for assembly, usage, and maintenance of these hoists.

Function Description:

The primary function of the ShoreStation SSV15100 and SSV15100 DW hoists is to lift a boat out of the water for storage, protection, and maintenance. This is achieved through a manual winch system that raises and lowers a platform on which the boat rests. The V-frame design provides stability and support for various boat types. The "DW" designation for the SSV15100 DW indicates a deep water version, designed to accommodate greater water depths through longer upright corner posts and adjustable legs.

Important Technical Specifications:

SSV15100 and SSV15100 DW Common Components:

Hoist Alum SS V-Frame: The core structural component, providing the V-shaped support for the boat.
Big Wheel - Lift ShoreStation (Part # 6243601): A large wheel used for manual operation of the winch, facilitating the lifting and lowering of the boat.
Hardware Box - SSV15100 Hoist (Part # 69423): Contains various fasteners and small parts necessary for assembly.
Lower Frame Bundle - V15100 (Part # 62421): The base structure of the hoist, providing stability and support.
Platform Bundle - V15100 (Part # 62423): The component on which the boat rests, designed to be raised and lowered.
Winch Bundle - Hoist V15/V30 (Part # 6942701): The complete winch assembly, including the mechanism for cable winding and boat lifting.
Winch Tube Bundle - V15/V20 (Part # 65582): Houses the winch components and guides the cable.
Bunk Poly V15/V20100 (Part # HA0020): Polyethylene bunks that cradle the boat hull, protecting it from damage.
Lit Packet, V15100/DW (Part # 69580): Contains documentation, including this service manual.

SSV15100 Specific Components:

Leg Bundle - V15100 (Part # 62926): Standard length legs for typical water depths.

SSV15100 DW Specific Components:

Leg Bundle - V15100 DW (Part # 67228): Extended length legs designed for deeper water applications.

Detailed Component Breakdown (from Parts List):

Adjustable Bunk Bracket (Part # 60047): 4 units, allows for adjustment of the bunks to fit different hull shapes.
Bushing Stainless Steel (Boat Lift) (Part # 60989): 2 units, reduces friction in moving parts.
Keel Protector Plate (Boat Lift) (Part # 60991): 2 units, protects the boat's keel from contact with the hoist.
Motor Stop Tube (Part # 60992): 2 units, prevents the boat's motor from contacting the hoist structure.
Winch Tube 1800-3600# Hoists (Part # 62328): The main tube for the winch mechanism.
Alum Spacer Plate Winch Tube (Part # 62329): 4 units, provides spacing for winch components.
Lower Frame Tube 4 X 2 X 99 (Part # 62428): 2 units, structural tubes for the lower frame.
Platform Rail 20100 (Part # 62429): 2 units, rails for the boat platform.
V-Frame Wment 20100 (Part # 62430): 2 units, V-frame structural weldments.
Wheel Big Lift ShoreStation (Part # 62436): The large operating wheel.
Winch Tube Cable Bracket (Part # 64845): Secures the winch cable to the tube.
Boat Stop Mtg Clamp ZYU (Part # 68615): 2 units, clamps for mounting the boat stop.
Bunk Assy Loft Poly (Part # 69029): 2 units, the complete bunk assembly.
Winch Case Assy 30108/30120 (Part # 69427): The housing for the winch gears and mechanism.
Various Hex Head (HH) and Carriage (CARR) Bolts: Ranging from 3/8-16 to 3/4-10 in various lengths (e.g., 0110059, 0110062, 0110064, 0110098, 0110114, 0110277, 0140022, 0140040, 0140045, 0210100).
Rubber Bumpers (Part # 0310097, 0310383): Protect the boat and hoist from impact.
Self-Tapping Screws (Part # 0810126).
Lockwashers (Part # 1310025, 1310040).
USS Flat Washers (Part # 1340095, 1340100, 1340105).
Hex Nuts (Part # 1410069, 1410361, 1410362, 1420309).
Hex Locknuts (Flange and Standard) (Part # 1440101, 1440102, 1440159).
Cotter Keys (Part # 1510078, 1540035).
Clevis Pins (Part # 1520240, 1540215).
Hitch Pin Clip (Part # 1540300).
Pin Stainless Steel W/Retainer (Part # 1540306).
Roll Pin (Part # 1540406).
Stainless Steel Pin (Part # 1540411).
Spring Compression (Part # 2121221).
Winch Cable (Part # 3110041, 3110047): Galvanized cables for lifting.
Cable Level Stainless (Part # 3110315): Cables for leveling the platform.
Bushing (Part # 3110318).
Cable 6 Wheel Stop Assy (Part # 3110330).
Grip Black (Part # 3510014): Handle grip for the winch wheel.
Motor Stop Plastic Tube (Part # 3510033).
Pulleys (Part # 3510083, 3510178).
Bushing Nylatron V-Hoist (Part # 3510099).
Axle Pad 12in Blk (Part # 3510132).
Spacer Bearing Pulley (Part # 3510180).
Corner Guide Molded Hoist (Part # 3510181).
Black Plastic Cap Turned Down (Part # 3510266).
Push Ring Wheel Stop (Part # 3510555).
Spacer (Part # 3810097).
Decals (Part # 4811312, 4811319): Clamp arrow and adjustable gauge decals.
Guide Post (Part # A100): 3 1/2 OD X 72IN, 3 units.
Winch Post (Part # A101): 3 1/2"OD X 80", 1 unit.
Adjustable Leg (Part # A102): 3 1/8OD X 30 1/2, 4 units.
Alum Base Pad (Part # A103): 4 units.
Alum Base Pad Channel Clamp (Part # A104): 4 units.
Lower Frame Tube 4 X 2 X 107IN (Part # A106): 2 units.
Post Brace (Part # A108): 2 1/4 X 3 X 108IN.
Lower Corner Block 4in Frame (Part # A109): 4 units.
Bottom Corner Cable Brkt (Part # A126): 2 units.
Top Clamp 1in With 2 3/8 Opening (Part # A129): 8 units.
Cable Attaching Strap Galv (Part # A134G): 2 units.
Leg Lift Rod (Boat Lift) (Part # A141): 4 units.
Washer Alum 2 1/8 (Part # A152): 2 units.
Cable Wedge 3/8 X 1 1/4 X 2 (Part # SS1156).

Deep Water Leg Specifications (SSV15100 DW):

Guide Post DW 3 1/2 X 100 3/8 (Part # 67224): 3 units, extended guide posts.
Adj Leg DW 3.125 X 72 (Part # 67225): 4 units, extended adjustable legs.
Standard legs offer 20" of adjustment.
Deep water legs offer 55" of adjustment.

Usage Features:

Manual Winch Operation: The hoist is operated manually using a large wheel, providing direct control over the lifting and lowering process.
Adjustable Bunks: The polyethylene bunks can be adjusted to conform to various boat hull shapes, ensuring proper support and preventing damage.
Deep Water Option: The SSV15100 DW variant is specifically designed for deeper water installations, offering extended leg adjustment for greater flexibility.
Boat Stop: Integrated boat stops prevent the boat from overshooting its position on the platform.
Leveling Cables: Cables are included to ensure the platform remains level during operation, providing stable support for the boat.
Corrosion Resistance: Constructed with aluminum and stainless steel components, the hoist is designed for durability in marine environments.

Maintenance Features:

Lubrication Points: The manual includes a "Lube Tube Decal" (Part # 4850206), indicating the importance of regular lubrication for smooth operation and longevity of moving parts, particularly the winch mechanism.
Cable Inspection: A "Caution Inspect Cable Decal" (Part # 4850224) highlights the critical need for regular inspection of the lifting cables for wear, fraying, or damage, which is essential for safety and reliable operation.
Adjustable Gauge Decal: An "Adjustable Gauge Decal" (Part # 4811319) assists in setting and maintaining the correct height and level of the hoist.
Component Replacement: The detailed parts list and exploded views facilitate the identification and replacement of individual components, simplifying repairs and maintenance.
Safety Decals: Various safety decals, such as "Warning UP/DOWN Spin Wheel Decal" (Part # 4850351) and "Safety Instruction Decal" (Part # 4850363), provide important operational guidelines to ensure user safety.
Bunk Maintenance: The polyethylene bunks are designed for low maintenance, primarily requiring cleaning and inspection for wear.
Structural Integrity: Regular inspection of the aluminum V-frame and other structural components is recommended to ensure continued stability and safety.